Valid HQT-4180 Exam Q&A PDF HQT-4180 Dump is Ready (Updated 75 Questions)
Exam Questions and Answers for HQT-4180 Study Guide
Hitachi HQT-4180 certification exam is a vendor-neutral certification that is recognized globally. HQT-4180 exam is designed to test the candidate's knowledge and skills related to Hitachi VSP Midrange family of storage solutions, regardless of vendor or platform. Hitachi Vantara Qualified Professional - VSP Midrange Family Installation certification is ideal for IT professionals who are responsible for deploying and managing storage systems in their organizations. By passing the Hitachi HQT-4180 certification exam, IT professionals can demonstrate their expertise in Hitachi VSP Midrange family of storage solutions and increase their value to their organizations.
NEW QUESTION # 40
You need to upgrade the firmware on a VSP G700.
Which file must you select to perform the upgrade using the Maintenance Utility?
- A. All Firmware.mda
- B. HA-MPC-xx.iso
- C. setup.exe
- D. HA-SVP-xx.iso
Answer: D
NEW QUESTION # 41
How many batteries does a VSP E1090 have per controller (CTL)?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 42
You need to perform the "New Installation" procedure for a VSP One B26 system.
What are two prerequisites? (Choose two.)
- A. The SVP must be connected to the customer network
- B. The CE hardware jumpers must be attached to both controllers
- C. The controller hardware must be cabled and assembled
- D. The MPC software must be configured on your CE laptop
Answer: C,D
NEW QUESTION # 43
You need to replace a broken fan in a VSP E1090.
What is the correct procedure?
- A. Remove the broken fan, then replace it.
- B. Use the MPC for blocking the fan, then replace it.
- C. Use the Maintenance Utility for stopping the fan, then replace it.
- D. Use Storage Navigator for blocking the fan, then replace it.
Answer: A
NEW QUESTION # 44
You need to replace a broken fan in the Backup Module with Fan BKMF21 on a VSP E1090.
What is the correct procedure?
- A. Use the MPC to remove the power from the backup module, and when the fan has stopped replace it.
- B. Go directly to the system and replace the faulty fan.
- C. Use Storage Navigator to put the Backup Module into replacement mode, then replace the fan.
- D. Use the Maintenance Utility for stopping the fan, then replace it.
Answer: C
NEW QUESTION # 45
What is the recommended RAID level when creating a Hitachi Dynamic Provisioning (HDP) pool?
- A. RAID 6
- B. RAID 1+0
- C. RAID 5
- D. RAID 1
Answer: B
NEW QUESTION # 46
What are two requirements for SVP connectivity on a VSP midrange system? (Choose two.)
- A. at least one 1000BASE-SX optical connection to the customer's network
- B. one Ethernet connection to the customer's network
- C. a static IP address for the SVP on the same network segment as the storage system
- D. one iSCSI connection from each controller to different LAN ports on the SVP
Answer: B,C
NEW QUESTION # 47
Which two actions can be performed with Hitachi Ops Center Administrator? (Choose two.)
- A. Manage multiple VSP Midrange storage systems.
- B. Perform Self-Service Maintenance.
- C. Configure the Hitachi Remote Ops Monitor Agent.
- D. Manage virtual storage machines.
Answer: A,D
NEW QUESTION # 48
Which program is used to perform the "New Installation" procedure on a VSP midrange system?
- A. MPC
- B. Webconsole
- C. BECK
- D. GUM
Answer: A
NEW QUESTION # 49
What is the maximum size of a basic volume carved out from an internal parity group on a VSP E590 system?
- A. 128 TB
- B. 2.99 TB
- C. 65 TB
- D. 1 TB
Answer: B
NEW QUESTION # 50
Which two reconfiguration activities are performed without interrupting host access on a VSP Gx00 system? (Choose two.)
- A. adding a DB60 drive tray
- B. adding a DKB
- C. upgrading from G200 to G600
- D. upgrading from G200 to G800
Answer: A,B
NEW QUESTION # 51
Which program is used to perform the "New Installation" procedure on a VSP midrange system?
- A. Webconsole
- B. MPC
- C. BECK
- D. GUM
Answer: D
NEW QUESTION # 52
You are installing a new VSP G700 and are using the Initial Setup Wizard (ISW) for the network configuration. Which set of IP addresses is configured with the ISW?
- A. IP addresses of management ports
- B. IP addresses of maintenance ports
- C. IP addresses of all the ports
- D. IP addresses of all the ports and of the SVP
Answer: A
NEW QUESTION # 53
How are system logs and error messages utilized when troubleshooting VSP midrange storage systems?
- A. They enable remote access and monitoring of the storage systems.
- B. They help identify hardware or software issues causing system malfunctions.
- C. They offer insights into the historical usage and trends of the storage systems.
- D. They provide real-time performance data for analysis and optimization.
Answer: B
NEW QUESTION # 54
A drive in a 3D + 1P RAID group fails in a VSP G700 and there is no spare drive available.
Which two actions are automatically performed by the system? (Choose two.)
- A. The Correction Copy process starts.
- B. The RAID group is placed in Correction Access.
- C. An alert is generated.
- D. Dynamic Sparing is started.
Answer: C,D
NEW QUESTION # 55
What are two consequences when a "New Installation" procedure is performed on a VSP Midrange system? (Choose two.)
- A. The MPC software is updated.
- B. The SVP drive is formatted.
- C. The license keys are deleted.
- D. All the data on RAID groups is lost.
Answer: B,D
NEW QUESTION # 56
......
Certification dumps - Hitachi Vantara Qualified Professional HQT-4180 guides - 100% valid: https://www.examdiscuss.com/Hitachi/exam/HQT-4180/
100% Pass Your HQT-4180 Hitachi Vantara Qualified Professional - VSP Midrange Family Installation at First Attempt with ExamDiscuss: https://drive.google.com/open?id=1ah9c20b6JjMyYM2KapX2kpm2nFrLaN-Y