[May-2025] Use Real ANVE Dumps Free Sample Questions and Practice Test Engine
Pass Axis ANVE exam - questions - convert Tets Engine to PDF
To take the Axis ANVE Certification Exam, candidates must have a solid understanding of network video technologies and concepts. They should possess relevant work experience in the field of network video surveillance and have a good grasp of networking and IT principles. ANVE exam is divided into two parts: a written exam and a hands-on lab exam. The written exam consists of multiple-choice questions that test the candidate's theoretical knowledge, while the lab exam assesses the candidate's practical skills in configuring and troubleshooting network video systems.
Which Axis ANVE Certification Exam should I take?
The ANVE certification exam can be taken in your local Axis reseller or authorized training center. Or you can take this exam if you're about to attend an Axis event. The test will be given at many of Axis' domestic and international events, so if you run into one of those, don't hesitate to sign up.
NEW QUESTION # 109
A camera lens with a low f-stop value of 1.2 will outperform a lens with a higher f-stop value due to which one of the parameters below?
- A. Improved sharpness
- B. Better low light capability
- C. Less image artifacts
- D. Better depth of field
Answer: B
Explanation:
A camera lens with a low f-stop value, such as 1.2, has a larger aperture, allowing more light to enter the camera. This improves the camera's performance in low-light conditions by increasing its sensitivity to light, resulting in clearer and more detailed images when lighting is poor. [Reference: Axis Communications - Camera Lens and Aperture]
NEW QUESTION # 110
Which IP rating is most appropriate for an outdoor school playground?
- A. IP54
- B. IP42
- C. IP67
- D. IP6K9K
Answer: C
Explanation:
For an outdoor school playground, the most appropriate IP rating is IP67. This rating indicates that the camera is completely protected against dust (the first digit '6') and can withstand immersion in water up to 1 meter for
30 minutes (the second digit '7'). This level of protection is ideal for outdoor environments where the camera may be exposed to dust, rain, and other environmental factors.References: Axis Communications Outdoor Cameras
NEW QUESTION # 111
A Day & Night camera automatically removes the IR-cut filter for low light operations. In that mode, the camera becomes sensitive to IR light. Which wavelength is the camera most sensitive to?
- A. 950 nm
- B. 1350 nm
- C. 850 nm
- D. 1140 nm
Answer: C
NEW QUESTION # 112
Which layer 4 protocol has less overhead information?
- A. HTTP
- B. TCP
- C. IP
- D. UDP
Answer: D
Explanation:
UDP (User Datagram Protocol) has less overhead information compared to TCP (Transmission Control Protocol). UDP is a simpler, connectionless protocol that does not require handshaking or error-checking mechanisms, resulting in lower overhead and faster transmission of data. This makes UDP more efficient for real-time applications such as video streaming, as detailed in Axis Communications' technical guides on network protocols.
NEW QUESTION # 113
What device is used to forward data from one LAN to another?
- A. A repeater
- B. A router
- C. A hub
- D. A firewall
Answer: B
Explanation:
A router is a device used to forward data from one Local Area Network (LAN) to another. It operates at the network layer (Layer 3) of the OSI model and uses IP addresses to determine the best path for data packets to travel between networks. Routers connect multiple networks, manage traffic, and facilitate communication between different network segments. References: Axis Communications network design documentation and standard networking resources.
NEW QUESTION # 114
Which setting would best adjust a hard yellow tint as shown in the pictures below?
- A. Image contrast
- B. Color saturation
- C. White balance
- D. Image brightness
Answer: C
Explanation:
The setting that would best adjust a hard yellow tint in the images is the white balance. Adjusting the white balance corrects color casts by accounting for the color temperature of the light source, thereby producing more natural colors in the image. In the example images, modifying the white balance would neutralize the yellow tint and restore accurate colors. Axis cameras have white balance settings that can be adjusted manually or set to automatic for optimal color representation. Further details can be found in Axis Communications' camera setup and image optimization documentation.
NEW QUESTION # 115
A camera is positioned where backlighting is a problem. What would be the preferred action?
- A. Axis P-iris technology will solve your problem
- B. Increase the shutter speed to more than 1 /100 s
- C. Add additional light sources to counter backlighting
- D. Use a lens with a polarized filter
Answer: C
NEW QUESTION # 116
The term f-stop, or f-number,
- A. Measures the lens' capability to collect light.
- B. Relates the focal length of the lens to the zoom factor.
- C. Is the end position of the focus motor in an autofocus system.
- D. Measures the lens' capability to focus on objects at short distance.
Answer: A
NEW QUESTION # 117
When using the view area functionality, each view area has its own video stream and (Choose two)
- A. Compression algorithm setting
- B. User credentials
- C. Exposure control setting
- D. Text overlay setting
- E. PTZ setting
Answer: C,D
Explanation:
When using the view area functionality in Axis cameras, each view area can have its own independent video stream. Additionally, each view area can have its own exposure control setting and text overlay setting. This allows for customized video streams with different exposure settings tailored to specific areas within the camera's field of view, as well as unique text overlays for each view area, providing flexibility in video management and presentation.
NEW QUESTION # 118
A VPN
- A. Creates a secure tunnel through the network, where your information travels encrypted.
- B. Is required to enable viewing network surveillance video on mobile devices.
- C. Translates domain names to IP addresses, according to the IPv4 standard.
- D. Is a network specially optimized to handle video data packets.
Answer: A
Explanation:
A VPN (Virtual Private Network) creates a secure tunnel through the network where your information travels encrypted. This means that data transmitted over the VPN is protected from eavesdropping and unauthorized access. It is not specifically optimized for video data packets nor does it translate domain names to IP addresses. Therefore, the correct answer is C. For more detailed information, refer to Axis Communications' guidelines on secure remote access and VPN usage.
NEW QUESTION # 119
What is the appropriate usage for an Axis thermal camera?
- A. Detecting activity in daylight and complete darkness
- B. Measuring exact temperatures in daytime
- C. Detecting motion only at nighttime
- D. Identifying people in complete darkness
Answer: A
Explanation:
Axis thermal cameras are designed to detect activity in both daylight and complete darkness by capturing the heat emitted by objects and people. Unlike traditional cameras that rely on visible light, thermal cameras are effective in various lighting conditions, including complete darkness, fog, smoke, and even camouflaged objects. This makes them suitable for perimeter protection and monitoring in challenging environments.
[Reference: Axis Communications - Thermal Cameras]
NEW QUESTION # 120
A convenience store needs a camera to cover the entrance. Identification is needed at 80 pixels per face.
Given that the scene is 2 m (6 ft 7 in) wide, which of these resolutions is the minimum one needed?
- A. 1920 X 1080
- B. 1280 X 720
- C. 800 X 600
- D. 640X480
Answer: B
NEW QUESTION # 121
For an outdoor camera, what is the potential consequence of not using this connector?
- A. jSlow PTZ control
- B. Reduced bandwidth
- C. yVater ingress
- D. IR and heaters won't work
Answer: C
Explanation:
For outdoor cameras, not using the proper connectors, such as weatherproof or waterproof connectors, can lead to water ingress. This can damage the camera's internal components, leading to malfunctions or complete failure of the device. Axis outdoor cameras are designed with specific connectors to ensure they are sealed against environmental factors like moisture, dust, and temperature extremes. According to Axis installation guides, ensuring the correct connectors are used is crucial for maintaining the camera's IP rating and long-term reliability.
NEW QUESTION # 122
Which is true regarding the use of a smoked (tinted) dome instead of a clear dome?
- A. Decreases field of view
- B. Decreases color fidelity
- C. Disables infrared capabilities
- D. Reduces light sensitivity
Answer: D
Explanation:
Using a smoked (tinted) dome on a camera reduces light sensitivity because the tinted material filters the amount of light that reaches the camera sensor. This can result in lower image quality, especially in low-light conditions. The decrease in light sensitivity does not affect color fidelity, field of view, or infrared capabilities directly. For more information, refer to Axis Communications' technical notes on dome coverings and their impact on camera performance.
NEW QUESTION # 123
AXIS Device Manager is
- A. licensed per system.
- B. licensed per company.
- C. licensed per connected channel.
- D. free of charge.
Answer: D
Explanation:
AXIS Device Manager is free of charge. This tool provides comprehensive management capabilities for Axis devices without any additional licensing fees. It allows users to efficiently manage, configure, and maintain their Axis network cameras and other devices, ensuring optimal performance and security. Axis offers this tool as part of their commitment to providing user-friendly and cost-effective solutions, as detailed in their product information and support resources.
Top of Form
Bottom of Form
NEW QUESTION # 124
When using the view area functionality, each view area has its own video stream and (Choose two)
- A. User credentials
- B. Text overlay setting
- C. PTZ setting
- D. Exposure control setting
- E. Compression algorithm setting
Answer: C,E
NEW QUESTION # 125
DRAG DROP
Match each device with the correct description. Drag each gray box from the left column to the matching blue box in the right column.
Answer:
Explanation:
NEW QUESTION # 126
A customer wants his video surveillance system to completely cover the perimeter of his property. For the installer to ensure that the camera system is not subject to sabotage, he should
- A. Install thermal cameras.
- B. Use PoE, and not a PoE splitter.
- C. Make sure each camera is seen by at least one other camera.
- D. Install more low-priced cameras to cover the complete site.
Answer: C
Explanation:
To ensure that a surveillance system is not easily sabotaged, it's important to position cameras so that each camera is visible to at least one other camera. This overlapping field of view allows for continuous monitoring even if one camera is tampered with or disabled, providing a higher level of security and redundancy.
[Reference: Axis Communications - Surveillance System Design]
NEW QUESTION # 127
An installer wants to connect and power a P|R sensor from an Axis camera's I/O port. What would be the output DC voltage?
- A. 3. 3 V
- B. 5V
- C. 1, 5V
- D. 7 V
Answer: A
NEW QUESTION # 128
How can a system designer compare the light sensitivity of network cameras from different manufacturers?
- A. Check the specified lux values of the cameras
- B. Measure the available light with an IR-capable light meter
- C. Test the cameras in the field or comparable conditions
- D. Refer to the SMTPE standard on light sensitivity
Answer: A
Explanation:
A system designer can compare the light sensitivity of network cameras from different manufacturers by checking the specified lux values of the cameras. Lux is a unit of measurement for illuminance, indicating how much light is needed for the camera to produce a usable image. Lower lux values indicate better low-light performance. While field testing can also be useful, lux values provide a standardized and quick reference for comparison. References: Axis Communications product specifications and industry standards on light sensitivity.
Top of Form
Bottom of Form
NEW QUESTION # 129
If your PoE switch is unable to supply sufficient power to the network device, which of the following should be used?
- A. PoE extender
- B. A UPS
- C. A layer 3 switch
- D. A midspan
Answer: D
Explanation:
If a PoE (Power over Ethernet) switch is unable to supply sufficient power to a network device, a midspan, also known as a PoE injector, should be used. A midspan is an external device that adds power to the Ethernet cable, thus providing the necessary power to the network device. This is particularly useful when existing network infrastructure cannot be upgraded to meet power requirements. According to Axis documentation, midspans are recommended to ensure adequate power delivery for network devices that require PoE.
NEW QUESTION # 130
Video motion detection (VMD) in a PTZ camera
- A. Is no different compared to a fix camera, since the Axis chip can detect in three dimensions.
- B. Can be used but only when the camera is used as a stationary camera.
- C. Is not possible since the camera will activate the VMD every time it is moving.
- D. Can be used since the camera is aborting the VMD during movement.
Answer: D
NEW QUESTION # 131
How can existing coaxial cable be leveraged when installing network cameras?
- A. They are excellent for power transmission
- B. They can be used but are normally in bad shape, making them futile to use
- C. By using a media converter
- D. Coax cannot be leveraged for network cameras
Answer: C
NEW QUESTION # 132
......
Pass Your ANVE Exam Easily - Real ANVE Practice Dump Updated May 08, 2025: https://www.examdiscuss.com/Axis/exam/ANVE/
2025 Realistic Verified Free Axis ANVE Exam Questions: https://drive.google.com/open?id=1b_3M5Q7cSEjVVlzNpnX1SraULbFVgE03