Latest 350-501 Pass Guaranteed Exam Dumps with Accurate & Updated Questions
350-501 Exam Brain Dumps - Study Notes and Theory
NEW QUESTION # 194
Refer to the exhibit. The network team must implement MPLS LDP session protection with two requirements:
Session protection is provided for core loopback IP addresses only.
The LDP session must remain operational for one hour when the WAN link on PE-XR1 fails.
Which configuration must the team implement on PE-XR1?
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: A
NEW QUESTION # 195
Refer to the exhibit:
Which statement about this configuration is true"?
- A. It is the configuration for the head-end router of a Cisco MPLS TE tunnel with segment routing
- B. It requires a dynamic Cisco MPLS TE path to be configured for the tunnel to run
- C. It requires an explicit Cisco MPLS TE path to be configured for the tunnel to run
- D. It requires OSPF to also be running to have optimized Cisco MPLS TE tunnels
Answer: A
NEW QUESTION # 196
Refer to the exhibit:
Export statistics received do not include the BGP next hop.
Which statement about the NetFlow export statistics is true?
- A. Only the origin AS of the source router will be included in the export statistics.
- B. The origin AS and the peer-as will be included in the export statistics.
- C. To include the BGP next hop in the export statistics, those keywords must be included with the version
9 entry. - D. Loopback 0 must be participating in BGP for it to be included in the export statistics.
Answer: C
NEW QUESTION # 197
Refer To the exhibit:
On R1, which output does the show isis neighbors command generate?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: A
NEW QUESTION # 198
Drag and Drop Question
Drag and drop the technologies from the left onto the correct definitions on the right.
Answer:
Explanation:
NEW QUESTION # 199
Refer to the exhibit:
Which effect of this configuration is true?
- A. it creates a pseudowire class named Cisco
- B. It enables AToM on interface gigabitethemet1/0
- C. It enables MPLS on the interface
- D. It enables tagging for VLAN 12 on the interface
Answer: A
NEW QUESTION # 200
Which configuration mode do you use to apply the mpls Idp graceful-restart command in IOS XE Software? MPLS
- A. global
- B. interface
- C. MPLS
- D. LDP neighbor
Answer: A
NEW QUESTION # 201
Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right
Answer:
Explanation:
NEW QUESTION # 202
Refer to the exhibit. An engineer is implementing Auto-RP and reviewing the configuration of the PE-A.
Which configuration permits Auto-RP messages to be forwarded over this interface?
- A. PE-A(config-if)#ip pim sparse-dense-mode
- B. PE-A(config-if)#ip pim sparse-mode
- C. PE-A(config-if)#ip igmp version 3
- D. PE-A(config-if)#no ip pim bsr-border
Answer: A
NEW QUESTION # 203
Which configuration enables BGP FlowSpec client function and installation of policies on all local interfaces?
- A. flowspec
address-family ipv4
local-install all-interface - B. flowspec
address-family ipv4
local-install interface-all - C. flowspec
address-family ipv4
install interface-all - D. flowspec
address-family ipv4
install interface-all local
Answer: B
Explanation:
Section: Architecture
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_bgp/configuration/xe-16-6/irg-xe-16-6- book/C3PL-BGP-Flowspec-Client.html
NEW QUESTION # 204 
Refer to the exhibit. R1 is connected to two service providers and is under a DDoS attack.
Which statement about this design is true if URPF in strict mode is configured on both interfaces?
- A. R1 drops destination addresses that are routed to a null interface on the router.
- B. R1 permits asymmetric routing as long as the AS-PATH attribute entry matches the connected AS.
- C. R1 drops all traffic that ingresses either interface that has a FIB entry that exits a different interface.
- D. R1 accepts source addresses on interface gigabitethernet0/1 that are private addresses.
Answer: C
Explanation:
Section: Architecture
NEW QUESTION # 205
Refer to the exhibit:
With which router does IOSXRV-1 have LDP session protection capability enabled but session hold up is not active?
- A. 192.168.0.1
- B. 192.168.0.5
- C. 192.168.0.3
- D. 192.168.0.4
Answer: C
NEW QUESTION # 206
Refer to the exhibit.
A Cisco engineer is implementing gRPC dial-out on an ASR. Receiver 192.168 1.1 will be assigned one of the subscriptions, and it will manage the ASR. Which command is needed to complete the router configuration?
- A. protocol tcp
- B. protocol grpc
- C. protocol all
- D. protocol any
Answer: A
Explanation:
NEW QUESTION # 207
An engineer is setting up overlapping VPNs to allow VRF ABC and XYZ to communicate with VRF CENTRAL but wants to make sure that VRF ABC and XYZ cannot communicate. Which configuration accomplishes these objectives?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: B
NEW QUESTION # 208
Refer to the exhibit:
A network administrator wants to enhance the security for SNMP for this configuration.
Which action can the network administrator implement?
- A. Re-configure to use SNMPv2 with MD5 authentication
- B. Re-configure to use SNMPv3.
- C. Maintain the configuration but switch to an encrypted password for device access through SSH
- D. Add a community string to the existing entry
Answer: B
NEW QUESTION # 209
Refer to the exhibit.
An engineer ran this show telemetry command to view subscription SUB11 on RouterX. The engineer then decided that RouterY should provide the same output lor sensor group SGroup13 as RouterX. The engineer cannot access RouterX to copy its configuration No access lists on the router block user access Which configuration must the engineer apply on RouterY to provide the same output from the show telemetry command?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 210
Refer to the exihibit.
Refer to the exhibit. Router BRDR-1 is configured to receive the 0.0.0.0/0 and 172.17.1.0/24 network via BGP and advertise then into OSPF area 0. An engineer has noticed that the OSPF domain is receiving only the 172.17.1.0/24 route and default router 0.0.0.0/0 is still missing. Which configuration must an engineer apply to resolve this problem?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: C
Explanation:
The issue of the OSPF domain receiving only the 172.17.1.0/24 route and not the default route 0.0.0.0/0 can be resolved by configuring OSPF to propagate default routes. Let's take a look at the options:
Option A: The configuration includes the following commands:
router ospf 1
default-information originate
end
This configuration generates a default route into the OSPF domain, which is missing in this scenario.
NEW QUESTION # 211
Refer to the exhibit. ISP ASN 65100 provides internet services to router CE-1 and receives customer prefix 198.18 18.0/24 via EBGP. An administrator for the ISP Is now provisioning RTBH services to provide on-demand data-plane security for the customer s IP space.
Which route-map configuration must the administrator apply to router RTBH-1 to complete the implementation of RTBH services to CE-1?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: C
NEW QUESTION # 212
Refer to the exhibit:
Which statement supports QPPB implementation?
- A. QPPB policies affect only egress traffic
- B. QoS policies are identified in the MPLS forwarding table
- C. QoS policies rely exclusively on BGP attributes to manipulate traffic
- D. QoS policies use BGP to gain full coverage on the network.
Answer: C
NEW QUESTION # 213
Refer to the exhibit.
Refer to the exhibit. EIGRP a running across the core lo exchange Internal routes, and each router maintains 6GP adjacency with the other routers on the network. An operator has configured static routes on the edge routers R1 and R2 for IP address 10.0.1.1. which is used as a black hole route as shown. Which configuration should the operator Implement to me management rouler to create a route map that will redistribute lagged static routes into BGP and create a static route to blackhole traffic with tag 777 that Is destined to server at 192.168.10.100?
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: A
NEW QUESTION # 214
Refer to the exhibit:
A network engineer is implementing QoS services. Which two statements about the QoS-group keyword on Cisco IOS XR 3re true? (Choose two )
- A. It cannot be used with priority traffic class
- B. QoS group marking occurs on the ingress
- C. It marks packets for end to end QoS pokey enforcement across the network
- D. The QoS group numbering corresponds to priority level
- E. QoS group can be used in fabric QoS policy as a match criteria
Answer: A,D
NEW QUESTION # 215
......
Pass Cisco 350-501 Test Practice Test Questions Exam Dumps: https://www.examdiscuss.com/Cisco/exam/350-501/
The Best CCNP Service Provider Study Guide for the 350-501 Exam: https://drive.google.com/open?id=1fy0w4cIo0-C0n7RdrqqdrUIbXf4BXQFN