[Jan 31, 2026] Free Network Security FCP_FGT_AD-7.6 Official Cert Guide PDF Download [Q32-Q50]

[Jan 31, 2026] Free Network Security FCP_FGT_AD-7.6 Official Cert Guide PDF Download

Fortinet FCP_FGT_AD-7.6 Official Cert Guide PDF

Fortinet FCP_FGT_AD-7.6 Exam Syllabus Topics:

Topic	Details
Topic 1	Routing: This section of the exam measures the skills of firewall administrators and covers the configuration of routing features on FortiGate devices. It includes defining and applying static routes for directing traffic within and outside the network, as well as setting up Software-Defined WAN (SD-WAN) to distribute and balance traffic loads across multiple WAN connections efficiently.
Topic 2	Firewall policies and authentication: This section of the exam measures the skills of firewall administrators and covers the implementation and management of security policies. It involves configuring basic and advanced firewall rules, applying Source NAT (SNAT) and Destination NAT (DNAT) options, and enforcing various firewall authentication methods. The section also includes deploying and configuring Fortinet Single Sign-On (FSSO) to streamline user access across the network.
Topic 3	Deployment and system configuration: This section of the exam measures the skills of network security engineers and covers essential tasks for setting up a FortiGate device in a production environment. Candidates are expected to perform the initial configuration, establish basic connectivity, and integrate the device within the Fortinet Security Fabric. They must also be able to configure a FortiGate Cluster Protocol (FGCP) high availability setup and troubleshoot resource and connectivity issues to ensure system readiness and network uptime.
Topic 4	Content inspection: This section of the exam measures the skills of network security engineers and covers the setup and management of content inspection features on FortiGate. Candidates must demonstrate an understanding of encrypted traffic inspection using digital certificates, identify and apply FortiGate inspection modes, and configure web filtering policies. The ability to implement application control for monitoring and regulating network application usage, configure antivirus profiles to detect and block malware, and set up Intrusion Prevention Systems (IPS) to shield the network from threats and vulnerabilities is also assessed.
Topic 5	VPN: This section of the exam measures the skills of network security engineers and covers the configuration and deployment of Virtual Private Network (VPN) solutions. Candidates are required to implement SSL VPNs to grant secure remote access to internal resources and configure IPsec VPNs in either meshed or partially redundant topologies to ensure encrypted communication between distributed network locations.

 

NEW QUESTION # 32
Refer to the exhibit.

FortiGate has two separate firewall policies for Sales and Engineering to access the same web server with the same security profiles.
Which action must the administrator perform to consolidate the two policies into one?

• A. Create an Aggregate interface that includes port1 and port2 to create a single firewall policy.
• B. Enable Multiple Interface Policies to select port1 and port2 in the same firewall policy.
• C. Select port1 and port2 subnets in a single firewall policy.
• D. Replace port1 and port2 with the any interface in a single firewall policy.

Answer: B

Explanation:
Enabling Multiple Interface Policies allows you to select multiple interfaces (like port1 and port2) in a single firewall policy, consolidating access rules for both Sales and Engineering to the web server.

NEW QUESTION # 33
What are two characteristics of HA cluster heartbeat IP addresses in a FortiGate device?
(Choose two.)

• A. A change in the heartbeat IP address happens when a FortiGate device joins or leaves the cluster.
• B. Heartbeat IP addresses are used to distinguish between cluster members.
• C. The heartbeat interface of the primary device in the cluster is always assigned IP address
  169.254.0.1.
• D. Heartbeat interfaces have virtual IP addresses that are manually assigned.

Answer: A,B

Explanation:
Heartbeat IP addresses are used to distinguish between cluster members → Each FortiGate in the HA cluster uses unique heartbeat IPs so members can identify one another.
A change in the heartbeat IP address happens when a FortiGate device joins or leaves the cluster → Heartbeat IPs are dynamically reassigned when the cluster membership changes to maintain proper communication.

NEW QUESTION # 34
An administrator wants to analyze and manage digital certificates to prevent browser warnings when users connect to the SSL VPN portal.
Which two statements describe how to correctly do this? (Choose two.)

• A. The administrator can use a publicly trusted certificate from a known certificate authority (CA) to stop browser warnings.
• B. The administrator must disable HTTPS administrative access entirely to avoid certificate warnings.
• C. The administrator can import the FortiGate self-signed certificate into each user's browser as a trusted certificate.
• D. The administrator can rely on the default FortiGate self-signed certificate to prevent all security warnings in the browser.

Answer: A,C

Explanation:
Using a publicly trusted certificate from a known CA prevents browser warnings without additional user action.
Importing the FortiGate self-signed certificate into users' browsers as trusted eliminates warnings caused by untrusted certificates.

NEW QUESTION # 35
Which two settings are required for SSL VPN to function between two FortiGate devices?
(Choose two.)

• A. The server FortiGate requires a CA certificate to verify the client FortiGate certificate.
• B. The client FortiGate requires the SSL VPN tunnel interface type to connect SSL VPN.
• C. The client FortiGate requires a client certificate signed by the CA on the server FortiGate.
• D. The client FortiGate requires a manually added route to remote subnets.

Answer: A,C

Explanation:
The server FortiGate requires a CA certificate to verify the client FortiGate certificate.
When configuring an SSL VPN tunnel between two FortiGates, the server FortiGate must verify the authenticity of the connecting client's certificate. This is done using a CA certificate installed on the server to ensure the client certificate is trusted.
The client FortiGate requires a client certificate signed by the CA on the server FortiGate.
The client FortiGate uses this client certificate to authenticate itself to the server during SSL VPN negotiation. The certificate must be signed by the same CA trusted by the server to establish a secure, validated SSL VPN connection.

NEW QUESTION # 36
Refer to the exhibit. Why did FortiGate drop the packet?

• A. It matched the default implicit firewall policy.
• B. The next-hop IP address is unreachable.
• C. It failed the RPF check.
• D. It matched an explicitly configured firewall policy with the action DENY.

Answer: A

Explanation:
The debug trace output shows that the packet was "Denied by forward policy check (policy 0)." In FortiGate, policy ID 0 corresponds to the default implicit deny policy. This means that if a packet does not match any configured firewall policies, it is denied by the default implicit policy.

NEW QUESTION # 37
Refer to the exhibit.

The predefined deep-inspection and custom-deep-inspection profiles exclude some web categories from SSL inspection, as shown in the exhibit.
For which two reasons are these web categories exempted? (Choose two.)

• A. The resources utilization is optimized because these websites are in the trusted domain list on FortiGate.
• B. The FortiGate temporary certificate denies the browser's access to websites that use HTTP Strict Transport Security.
• C. The legal regulation aims to prioritize user privacy and protect sensitive information for these websites.
• D. These websites are in an allowlist of reputable domain names maintained by FortiGuard.

Answer: B,C

Explanation:
FortiGate's temporary SSL certificate may cause access denial to sites using HTTP Strict Transport Security (HSTS), so such sites are exempted from deep SSL inspection.
Legal regulations require exemption of certain categories to protect user privacy and sensitive information, so these web categories are excluded from SSL inspection.

NEW QUESTION # 38
Refer to the exhibit.

An administrator has created a new firewall address to use as the destination for a static route.
Why is the administrator not able to select the new address in the Destination field of the new static route?

• A. In the new static route, the administrator must first set the interface to port2.
• B. In the new firewall address, Routing configuration must be enabled.
• C. In the new firewall address, the FQDN address must first beresolved.
• D. In the new static route, the administrator must select Named Address.

Answer: B

Explanation:
To use an FQDN-based address object as a destination in a static route, the "Routing configuration" option must be enabled in the firewall address settings. Without this, the address cannot be selected for routing.

NEW QUESTION # 39
What is the primary FortiGate election process when the HA override setting is enabled?

• A. Connected monitored ports > Priority > System uptime > FortiGate serial number
• B. Connected monitored ports > Priority > HA uptime > FortiGate serial number
• C. Connected monitored ports > HA uptime > Priority > FortiGate serial number
• D. Connected monitored ports > System uptime > Priority > FortiGate serial number

Answer: B

Explanation:
If Override DISABLED then: ports > HA Uptime > Priority > SN.
If Overrrid ENABLED then: ports > Priority > HA Uptime > SN.

NEW QUESTION # 40
Refer to the exhibit, which shows an SD-WAN zone configuration on the FortiGate GUI.

Based on the exhibit, which statement is true?

• A. The virtual-wan-link zone contains no member.
• B. The d-wan zone contains no member.
• C. The underlay zone contains port1 and port2.
• D. The d-wan zone cannot be deleted.

Answer: B

Explanation:
The "d-wan" zone in FortiGate SD-WAN configuration is the default SD-WAN zone created when SD- WAN is enabled. This zone contains all the interfaces assigned to SD-WAN and is essential for the functionality of the SD-WAN feature. The "d-wan" zone cannot be deleted because it is required for SD-WAN operations. Option A is incorrect because the underlay zone does not contain port1.

NEW QUESTION # 41
Which three methods are used by the collector agent for AD polling? (Choose three.)

• A. NetAPI
• B. WinSecLog
• C. FSSO REST API
• D. FortiGate polling
• E. WMI

Answer: A,C,E

Explanation:
The Fortinet Collector Agent can use the following methods to poll Active Directory (AD) for user logon events:
NetAPI - Queries the domain controllers directly to obtain user logon information.

FSSO REST API - Allows integration and polling via modern API-based communication for user

authentication updates.
WMI (Windows Management Instrumentation) - Retrieves logon data from domain controllers

using WMI queries.

NEW QUESTION # 42
Which three statements about SD-WAN performance SLAs are true? (Choose three.)

• A. They rely on session loss and jitter.
• B. They monitor the state of the FortiGate device.
• C. They are applied in a SD-WAN rule lowest cost strategy.
• D. All the SLAtargets can be configured.
• E. They can be measured actively or passively.

Answer: A,D,E

Explanation:
SD-WAN SLAs monitor metrics like packet loss and jitter to evaluate link performance. SLA measurements can be performed using active probing or passive monitoring. Administrators can configure all SLA target parameters to define performance criteria.

NEW QUESTION # 43
What are two features of FortiGate FSSO agentless polling mode? (Choose two.)

• A. FortiGate does not support workstation check.
• B. FortiGate directs the collector agent to use a remote LDAP server.
• C. FortiGate uses the AD server as the collector agent.
• D. FortiGate uses the SMB protocol to read the event viewer logs from the DCs.

Answer: C,D

Explanation:
FortiGate uses the SMB protocol to read the event viewer logs from the DCs → In agentless polling mode, FortiGate connects directly to the AD domain controllers using SMB to collect logon events.
FortiGate uses the AD server as the collector agent → There is no external FSSO collector; instead, the FortiGate itself polls the AD servers, effectively treating them as the source of logon information.

NEW QUESTION # 44
What are two features of FortiGate FSSO agentless polling mode? (Choose two.)

• A. FortiGate does not support workstation check.
• B. FortiGate directs the collector agent to use a remote LDAP server.
• C. FortiGate uses the AD server as the collector agent.
• D. FortiGate uses the SMB protocol to read the event viewer logs from the DCs.

Answer: A,D

NEW QUESTION # 45
Refer to the exhibit, which shows a partial configuration from the remote authentication server.

Why does the FortiGate administrator need this configuration?

• A. To set up a RADIUS server Secret.
• B. To authenticate and match the Training OU on the RADIUS server.
• C. To authenticate Any FortiGate user groups.
• D. To authenticate only the Training user group.

Answer: D

Explanation:
The Fortinet-Group-Name attribute is used to restrict authentication to users who belong specifically to the "Training" user group on the RADIUS server.

NEW QUESTION # 46
An administrator wants to form an HA cluster using the FGCP protocol.
Which two requirements must the administrator ensure both members fulfill? (Choose two.)

• A. They must have the same HA group ID.
• B. They must have the same hard drive configuration.
• C. They must have the same number of configured VDOMs.
• D. They must have the heartbeat interfaces in the same subnet.

Answer: A,B

NEW QUESTION # 47
Refer to the exhibit. What would be the impact of these settings on the Server certificate SNI check configuration on FortiGate?

• A. FortiGate will accept and use the CN in the server certificate for URL filtering if the SNI does not match the CN or SAN fields.
• B. FortiGate will close the connection if the SNI does not match the CN or SAN fields.
• C. FortiGate will close the connection if the SNI does not match the CN and SAN fields
• D. FortiGate will accept the connection with a warning if the SNI does not match the CN or SAN fields.

Answer: C

Explanation:
With the Server certificate SNI check set to Strict, FortiGate enforces that the SNI must match either the Common Name (CN) or Subject Alternative Name (SAN) in the server certificate; otherwise, it closes the connection.

NEW QUESTION # 48
Refer to the exhibit.

Which two statements are true about the routing entries in this database table? (Choose two.)

• A. All of the entries in the routing database table are installed in the FortiGate routing table.
• B. The port2 interface is marked as inactive.
• C. Both default routes have different administrative distances.
• D. The default route on port2 is marked as the standby route.

Answer: C,D

Explanation:
The routing table in the exhibit shows two default routes (0.0.0.0/0) with different administrative distances:
* The default route through port2 has an administrative distance of 20.
* The default route through port1 has an administrative distance of 10.
Administrative distance determines the priority of the route; a lower value is preferred. Here, the route through port1 with an administrative distance of 10 is the preferred route. The route through port2 with an administrative distance of 20 acts as a standby or backup route. If the primary route (port1) fails or is unavailable, traffic will then be routed through port2.
Regarding the statement that the port2 interface is marked as inactive, there is no indication in the routing table that port2 is inactive. Similarly, all the routes displayed are not necessarily installed in the FortiGate routing table, as the table could include both active and backup routes.
References:
FortiOS 7.4.1 Administration Guide: Default route configuration
FortiOS 7.4.1 Administration Guide: Routing table explanation

NEW QUESTION # 49
Refer to the exhibit.

A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 status is up, but phase 2 fails to come up.
Based on the phase 2 configuration shown in the exhibit, which two configuration changes will bring phase 2 up? (Choose two.)

• A. On HQ-NGFW. set Encryption to AES256
• B. On BR1-FGT, set Remote Address to 10.0.11.0/255.255.255.0
• C. On BR1-FGT, set Seconds to 43200.
• D. On HQ-NGFW, enable Diffie-Hellman Group 2.

Answer: B,C

Explanation:
The key lifetime (Seconds) must match on both sides; BR1-FGT is set to 14400, so setting it to 43200 matches HQ-NGFW.
The remote address on BR1-FGT should match the HQ-NGFW's local subnet (10.0.11.0/24), but it is currently set incorrectly as 172.20.1.0/24. Changing it to 10.0.11.0/255.255.255.0 will align the Phase 2 selectors.

NEW QUESTION # 50
......

Free FCP_FGT_AD-7.6 Exam Dumps to Improve Exam Score: https://www.examdiscuss.com/Fortinet/exam/FCP_FGT_AD-7.6/

Exam FCP_FGT_AD-7.6: New Brain Dump Professional - ExamDiscuss: https://drive.google.com/open?id=1e_OO4z-P9GKsroylUnfS9ScJF3ieQoHm