[Apr 09, 2026] Updates Up to 365 days On Valid 200-301 Braindumps [Q248-Q271]

[Apr 09, 2026] Updates Up to 365 days On Valid 200-301 Braindumps

Best Quality200-301 Exam Questions Cisco Test To Gain Brilliante Result

Cisco 200-301 certification exam is a single exam that covers a wide range of networking topics. 200-301 exam is designed to validate the candidate's understanding of network concepts and their ability to configure, troubleshoot, and manage Cisco networks. 200-301 exam is available in multiple languages and can be taken at any Pearson VUE testing center worldwide.

The CCNA certification is a globally recognized certification that demonstrates your ability to install, configure, operate, and troubleshoot medium-sized routed and switched networks. Cisco Certified Network Associate Exam certification is an essential requirement for network administrators, network engineers, and IT professionals who are responsible for managing and maintaining networking systems.

NEW QUESTION # 248
Refer to Exhibit.

The loopback1 interface of the Atlanta router must reach the loopback3 interface of the Washington router.
Which two static host routes must be configured on the NEW York router? (Choose two)

A. ipv6 route 2000::3/128 2023::3
B. ipv6 route 2000::1/128 s0/0/1
C. ipv6 route 2000::3/128 s0/0/0
D. ipv6 route 2000::1/128 2012::2
E. ipv6 route 2000::1/128 2012::1

Answer: A,E

NEW QUESTION # 249
A Cisco engineer must configure a single switch interface to meet these requirements
* accept untagged frames and place them in VLAN 20
* accept tagged frames in VLAN 30 when CDP detects a Cisco IP phone
Which command set must the engineer apply?

Answer: B

NEW QUESTION # 250
Refer to the exhibit.

Shortly after SiteA was connected to SiteB over a new single-mode fiber path users at SiteA report intermittent connectivity issues with applications hosted at SiteB What is the cause of the intermittent connectivity issue?

A. Interface errors are incrementing
B. An incorrect SFP media type was used at SiteA
C. High usage is causing high latency
D. The sites were connected with the wrong cable type

Answer: A

NEW QUESTION # 251
Refer to the exhibit. Shortly after SiteA was connected to SiteB over a new single-mode fiber path, users at SiteA report intermittent connectivity issues with applications hosted at SiteB. What is the cause of the intermittent connectivity issue?

A. Interface errors are incrementing
B. An incorrect SFP media type was used at SiteA
C. High usage is causing high latency
D. The sites were connected with the wrong cable type

Answer: A

Explanation:
reliability 255/255: When the input and output errors increase, they affect the reliability counter.
This indicates how likely it is that a packet can be delivered or received successfully. Reliability is calculated like this: reliability = number of packets / number of total frames. The value of 255 is the highest value meaning that the interface is very reliable at the moment. The calculation above is done every 5 minutes.

NEW QUESTION # 252
Refer to the exhibit.

Which configuration on RTR-1 denies SSH access from PC-1 to any RTR-1 interface and allows all other traffic?

A. access-list 100 deny tcp host 172.16.1.33 any eq 23 access-list 100 permit ip any anyline vty 0 15 ip access-group 100 in
B. access-list 100 deny tcp host 172.16.1.33 any eq 22 access-list 100 permit ip any anyinterface GigabitEthernet0/0 ip access-group 100 in
C. access-list 100 deny tcp host 172.16.1.33 any eq 22 access-list 100 permit ip any anyline vty 0 15 ip access-group 100 in
D. access-list 100 deny tcp host 172.16.1.33 any eq 23 access-list 100 permit ip any anyinterface GigabitEthernet0/0 ip access-group 100 in

Answer: C

NEW QUESTION # 253

Refer to the exhibit. An engineer is creating a secure preshared key based SSID using WPA2 for a wireless network running on 2.4 GHz and 5 GHz. Which two tasks must the engineer perform to complete the process?
(Choose two.)

A. Select the AES (CCMP128) option for WPA2/WPA3 Encryption.
B. Select the WPA Policy option.
C. Select the AES option for Auth Key Management.
D. Select the PSK option for Auth Key Management.
E. Select the 802.1 x option for Auth Key Management.

Answer: A,C

NEW QUESTION # 254
Refer to the exhibit. A network engineer must configure the WLC to allow only DHCP and DNS packets for User1 and User2. Which configuration must be used?

A. Enable Web Authentication under the AAA Server configuration on the WLAN.
B. Enable Web Authentication for 802.1X standard in the Layer 2 Security configuration
C. Enable Web policy and Authentication in the Layer 3 Security configuration.
D. Enable Fallback Policy with MAC filtering under the Layer 3 Security configuration

Answer: C

NEW QUESTION # 255
Refer to the exhibit.

Which route type does the routing protocol Code D represent in the output?

A. route learned through EIGRP
B. internal BGP route
C. statically assigned route
D. /24 route of a locally configured IP

Answer: A

NEW QUESTION # 256
What is the function of FTP?

A. Uses block number to identify and mitigate data-transfer errors
B. Uses two separate connections for control and data traffic
C. Relies on the well-known UDO port 69 for data transfer
D. Always operated without user connection validation

Answer: B

NEW QUESTION # 257
Drag and drop the 802.11 wireless standards from the left onto the matching statements on the right

Answer:

Explanation:

NEW QUESTION # 258
Which switching feature removes unused MAC addresses from the MAC address table, which allows new MAC addresses to be added?

A. MAC move
B. dynamic MAC address learning
C. MAC address aging
D. MAC address auto purge

Answer: C

NEW QUESTION # 259
Refer to the exhibit.

Drag and drop the networking parameters from the left onto the correct values on the right.

Answer:

Explanation:

NEW QUESTION # 260
Refer to the exhibit.

Which minimum configuration items are needed to enable Secure Shell version 2 access to R15?
A)

B)

C)

D)

A. Option B
B. Option C
C. Option A
D. Option D

Answer: B

NEW QUESTION # 261

Refer to the exhibit. OSPF neighbors routers A, B, C, and D are sending a route for 10.227.150.160/27. When the current route for 10.227.150.160/27 becomes unavailable, which cost will router Y use to route traffic to
10.227.150.160/27?

A. Cost 50
B. Cost 40
C. Cost 20
D. Cost 30

Answer: C

NEW QUESTION # 262
Drag and drop the TCP or UDP details from the left onto their corresponding protocols on the right.

Answer:

Explanation:

NEW QUESTION # 263
Refer to the exhibit.

An administrator must turn off the Cisco Discovery Protocol on the port configured with address last usable address in the 10.0.0.0/30 subnet. Which command set meets the requirement?

A. interface gi0/1
no cdp enable
B. interface gi0/1
clear cdp table
C. interface gi0/0
no cdp run
D. interface gi0/0
no cdp advertise-v2

Answer: C

NEW QUESTION # 264
Refer to the exhibit.

The following must be considered:
* SW1 is fully configured for all traffic
* The SW4 and SW9 links to SW1 have been configured
* The SW4 interface Gi0/1 and Gi0/0 on SW9 have been configured
* The remaining switches have had all VLANs added to their VLAN database Which configuration establishes a successful ping from PC2 to PC7 without interruption to traffic flow between other PCs?
A)

B)

A. Option A
B. Option B

Answer: A

NEW QUESTION # 265
What is an advantage of Cisco DNA Center versus traditional campus device management?

A. It is designed primarily to provide network assurance.
B. It enables easy autodiscovery of network elements in a brownfield deployment.
C. It supports high availability for management functions when operating in cluster mode.
D. It supports numerous extensibility options, including cross-domain adapters and third-party SDKs.

Answer: D

NEW QUESTION # 266
Refer to the exhibit.

An engineer is asked to insert the new VLAN into the existing trunk without modifying anything previously configured Which command accomplishes this task?

A. switchport trunk allowed vlan 104
B. switchport trunk allowed vlan all
C. switchport trunk allowed vlan add 104
D. switchport trunk allowed vlan 100-104

Answer: A

NEW QUESTION # 267
Refer to the exhibit. Which two events occur on the interface,if packets from an unknown Source address arrive after the interface learns the maximum number of secure MAC address? (Choose two)

A. The security violation counter dose not increment
B. The interface is error-disabled
C. The port LED turns off
D. The interface drops traffic from unknown MAC address
E. A syslog message is generated

Answer: A,D

NEW QUESTION # 268
Drag the descriptions of device management from the left onto the types of device management on the right.

Answer:

Explanation:

NEW QUESTION # 269
I
What is the purpose of using First Hop Redundancy Protocol on a specific subnet?

A. forwards multicast hello messages between routers
B. Filter traffic based on destination IP addressing
C. Sends the default route to the hosts on a network
D. ensures a loop-free physical topology

Answer: D

NEW QUESTION # 270
Refer to the exhibit.

An engineer is tasked with verifying network configuration parameters on a client workstation to report back to the team lead. Drag and drop the node identifiers from the left onto the network parameters on the right.