Free 350-050 Questions for Cisco 350-050 Exam

Question #1

Refer to the exhibit.

Given this debug output from the debug wlccp wds mn command, which event has occurred?

A. A wireless client with an IP address of 192.168.200.33 has joined the Cisco WDS domain.

B. A wireless client with an IP address of 192.168.200.33 has re-associated to the Cisco WDS domain.

C. A wireless client has failed authentication.

D. A wireless client has been removed from the Cisco WDS domain.

Discussion 0

Correct Answer: A Vote an answer

Question #2

How can you configure an NTP server address for Cisco Secure ACS 5.2?

A. on the hosting Microsoft Windows operating system

B. not possible because there are no NTP settings for ACS

C. through the ACS CLI only

D. through both the ACS GUI and CLI

E. through the ACS GUI only

Discussion 0

Correct Answer: C Vote an answer

Question #3

You have been hired to conduct a predeployment indoor wireless site survey. Which item is not needed before starting the project?

A. a list of client devices and applications that will use wireless at the facility

B. topographical maps

C. a statement of work that details the areas of the facility in which the customer wants to deploy wireless

D. Layer 2 security requirements for the WLAN

E. architecture drawings of the facility

Discussion 0

Correct Answer: B Vote an answer

Question #4

A clause 15 radio uses ___________ and supports data rates of ___________ .

A. FHSS, 1 Mb/s and 2 Mb/s

B. DSSS, 1 Mb/s up to 11 Mb/s

C. DSSS, 1 Mb/s and 2 Mb/s

D. FHSS or DSSS, 1 Mb/s up to 11 Mb/s

Discussion 0

Correct Answer: C Vote an answer

Question #5

Which two methods can be used in Cisco Secure ACS 5.2 to assign client authentication requests to different access services or authorization policies, based on the SSID to which the client is associated? (Choose two.)

A. condition based on the RADIUS-IETF:Called-Station-ID(30) attribute

B. DNIS-based end station filter

C. CLI-based end station filter

D. condition based on the RADIUS-IETF. Filter-ID(11) attribute

E. condition based on the RADIUS-IETF:Calling-Station-ID(31) attribute

Discussion 0

Correct Answer: A,B Vote an answer

Question #6

You are a wireless network administrator for a company that has installed a network that is based on Cisco WLC and uses Aironet 1140 Series APs. The clients are using the 2.4 GHz band and WPA TKIP for Layer 2 security. The president of the company reads a news article on the benefits of 802.11n and wants to deploy it at the office so that the company can use data rates of up to 150 Mb/s. What should you tell the president?

A. You need to change the client Layer 2 security to open.

B. You need to purchase different APs because the 1140 Series supports only up to 54 Mb/s.

C. You need to change your Layer 2 security policy to WPA2 AES to achieve the 300 Mb/s data rate.

D. 802.11n data rates are possible with the current client Layer 2 security, but for a theoretical data rate of 300 Mb/s, you need to use channel bonding, which is not recommended on the 2.4 GHz band.

E. 802.1n data rates are possible only on 5 GHz.

F. You need to change the client Layer 2 security to WPA2 TKIP.

Discussion 0

Correct Answer: C Vote an answer

Question #7

To manage the wireless network separately, an IT administrator created several virtual domains on the Cisco WCS. APs and WLCs were assigned to these virtual domains. However, when the IT staff logs into the Cisco WCS, they are assigned to the default root domain. The Cisco WCS login request is authenticated by an external RADIUS server. What needs to be configured next to solve this problem?

A. The IT administrator needs to add local user accounts in the Cisco WCS.

B. The IT administrator needs to add the correct attribute in the RADIUS server to assign the administrator to the proper virtual domain.

C. The administrator needs to change to TACACS+ authentication because the virtual domain cannot be assigned via RADIUS authentication.

D. The IT administrator needs to configure the user group settings to map users to the proper virtual domain.

E. Users need to manually select the proper virtual domain after logging into the root domain.

Discussion 0

Correct Answer: B Vote an answer

Question #8

According to Cisco best practices, many features require the WLC to be synchronized with an NTP server. For which of these options is time synchronization not required?

A. CAPWAP

B. MFP

C. SNMPv3

D. Location

Discussion 0

Correct Answer: A Vote an answer

Question #9

Before conducting a passive RF site survey with a standalone AP, which two of these should be statically configured on the AP? (Choose two.)

A. Tx power level

B. channel assignment

C. channel scan defer priority

D. DTPC

E. passive client

Discussion 0

Correct Answer: A,B Vote an answer

Question #10

DRAG DROP

Discussion 0

Correct Answer:

Question #11

Refer to the exhibit.

The help desk informs you that some users cannot receive multicast video. Upon troubleshooting, you determine that the users who are unable to receive the multicast video are all connected at 9 Mbps. Users that are connected at a data rate of 12 Mbps or higher are able to receive the multicast video. Which data rate can you modify to fix the problem?

A. Change 9 Mbps to Disabled.

B. Change 6 Mbps to Mandatory.

C. Change 9 Mbps to Supported.

D. Change 6 Mbps to Supported.

Discussion 0

Correct Answer: A Vote an answer

Question #12

Refer to the exhibit.

Which DHCP option is shown?

A. Option 32

B. Option 43

C. Option 150

D. Option 241

E. Option 60

Discussion 0

Correct Answer: B Vote an answer

Question #13

Users complain about intermittent wireless connectivity issues. You see the following message on your Cisco WCS, corresponding the time the connectivity issues occurred.
AP 'building-1-entrance', interface '802.11b/g' on Controller '10.1.1.2'. Noise threshold violated.
What do you do?

A. Check the logs for rogues in the area, and turn on rogue mitigation.

B. Increase the power of the APs in the entrance hall.

C. Increase the interference threshold from the default 10%.

D. Use a spectrum analyzer to discover the noise source.

Discussion 0

Correct Answer: D Vote an answer

Question #14

Company ABC has a deployment plan that includes multiple controllers. To start the deployment and manage the controllers more efficiently, the IT administrator decides to use controller autoprovisioning on Cisco WCS. Which three controller options are available as matching criteria? (Choose three.)

A. UDI

B. MAC address

C. serial number

D. hostname

E. device type

F. management IP address

Discussion 0

Correct Answer: B,C,D Vote an answer

Question #15

Refer to the exhibit.

After setting up an AP to be part of network where WDS is running, you notice that the newly added AP is not able to join the WDS device. On the newly added AP, you only configure wlccp ap username cisco password ccie. You enable debug radius local-server error to help troubleshoot the issue.
Given the debug output, what is the most likely cause of the issue?

A. The newly added AP is configured with a wrong password.

B. The WDS device is configured as a local RADIUS and there is a mismatch on the RADIUS shared secret.

C. The WDS device is configured for EAP-FAST authentication and the newly added AP is using LEAP.

D. The RADIUS server is not reachable.

E. The WDS device is configured as a local RADIUS and the EAP packets are looping in the network.

Discussion 0

Correct Answer: A Vote an answer

Free 350-050 Questions for Cisco CCIE Wireless Exam (V2.0) 350-050 Exam as PDF & Practice Test Engine

Download Free Cisco 350-050 Demo