Free 199-01 Questions for Riverbed 199-01 Exam

Question #1

What parameters are required to add a new Steelhead appliance on the CMC appliance? (Select 2)

A. User name and password

B. IP address

C. Serial number

D. Sport ID

E. Hostname

Discussion 0

Correct Answer: A,C Vote an answer

Question #2

Citrix optimization does not work although you removed ports 1494 and 2598 from the Interactive Ports label and enabled Citrix optimization on the client-side Steelhead appliance. What could be the problem? (Select 2)

A. Secure ICA encryption needs to be enabled.

B. You need to enable Citrix optimization on the server-side Steelhead appliance.

C. You need to restart the optimization service.

D. Citrix CDM optimization needs to be enabled.

Discussion 0

Correct Answer: B,C Vote an answer

Question #3

You enabled port transparency but noticed that active FTP connections are failing.What may be the problem?

A. Port transparency only maintains destination ports

B. Port transparency requires NAT

C. None of the above

D. The routers need to understand port transparency

E. You need to a fixed-target rule on the server-side for port transparency

Discussion 0

Correct Answer: A Vote an answer

Question #4

You need to perform a tcpdump of traffic entering the Steelhead appliance's lan0_0 interface.Which of the following demonstrate the proper command format to perform the tcpdump and capture to a file?

A. tcpdump -p lan0_0 -S 300 -w lancap.cap

B. tcpdump -i lan0_0 -s 300 -w lancap.cap

C. tcpdump -i lan0_0

D. tcpdump -I lan0_0 -s 300

E. tcpdump -i lan0_0 -3 300 -r lancap.cap

Discussion 0

Correct Answer: B Vote an answer

Question #5

In a virtual-inpath deployment, when the Steelhead appliance exports data to a flow data collector:

A. All traffic has the LAN and WAN interface index.

B. All traffic has the primary interface index.

C. All traffic has the WAN interface index.

D. All traffic has the LAN interface index.

Discussion 0

Correct Answer: C Vote an answer

Question #6

Assuming auto-discovery is used, WCCP redirect-in statements would normally be placed on which router interfaces? (Select 2)

A. The interface that the Steelhead appliances are connected to

B. The interface on the WAN side

C. The loopback interface

D. The interface on the LAN side

Discussion 0

Correct Answer: B,D Vote an answer

Question #7

What information does the OVA package include about the Virtual Steelhead appliance? (Select 4)

A. License

B. Memory

C. Storage

D. CPU

E. Virtual disks

Discussion 0

Correct Answer: B,C,D,E Vote an answer

Question #8

When bi-directional network address translation (NAT) is used between the Steelhead appliances, optimization is not working.A workaround to this is: (Select 2)

A. Enable server-side out-of-the-path on the server-side Steelhead appliance

B. There is no work around for a double NAT'd situation

C. Enable destination oobtransparency

D. Use fixed-target rules on the server-side Steelhead appliance

E. Enable Full Transparency

Discussion 0

Correct Answer: C,E Vote an answer

Question #9

On the Interceptor appliance, what are the possible filter settings on a load balancing rule? (Select 4)

A. Source Port

B. VLAN ID

C. Destination Port

D. Source IP Subnet

E. Destination IP Subnet

Discussion 0

Correct Answer: B,C,D,E Vote an answer

Question #10

The primary purpose of the Redirect In-path rule is to:

A. Utilize the Interceptor appliance as a backup firewall device

B. Select which traffic to redirect to Steelhead appliances

C. Select to which Steelhead appliance(s) traffic will be redirected

D. Select which traffic to split to two different interfaces

Discussion 0

Correct Answer: B Vote an answer

Question #11

How do you clean the datastore on a Steelhead appliance?
1) > restart empty 2) > reload clean 3) # restart empty 4) # restart clean 5) (config) # reload clean

A. 1, 2, 3, 4, 5

B. 3, 4, 5

C. 4, 5

D. 1, 2

E. 2, 3

Discussion 0

Correct Answer: C Vote an answer

Question #12

Which statements are true regarding the default methods by which load-balancing takes place in the Interceptor appliance. (Select 2)

A. The Interceptor appliance uses round robin, for each TCP connection, regardless of source or destination IP address, and is equally load-balanced between a group of Steelhead appliances

B. The Interceptor appliance uses hash assignment, for each TCP connection depending the hash value calculated from source and destination IP address, and is directed to a particular Steelhead appliance in the local cluster

C. The Interceptor appliance uses round robin, for each TCP connection, depending on source IP address, and is equally load-balanced between a group of Steelhead appliances

D. The Interceptor appliance can dynamically determine and direct traffic for optimization to the least-loaded Steelhead appliances based on Steelhead appliance resource usage

E. The Interceptor appliance uses peer affinity, a Steelhead appliance in the local cluster that has been previously paired with a destination IP address is preferred

F. The Interceptor appliance uses peer affinity, a Steelhead appliance in the local cluster that has been previously paired with a remote Steelhead appliance is preferred

Discussion 0

Correct Answer: D,F Vote an answer

Question #13

Which of the following is NOT supported in Alarm Settings?

A. Raise alarm if a software version mismatch is detected in the network

B. Raise alarm when network interface duplex errors are detected

C. Raise alarm when network interface link errors are detected

D. Raise alarm when the number of optimized connections exceeds user specified limit

E. Raise alarm when asymmetric routes are detected

Discussion 0

Correct Answer: D Vote an answer

Question #14

What is configured in an Acceleration policy? (Choose the best answer)

A. Redundant Steelhead Mobile Controllers

B. In-path rules

C. Port labels

D. Group IDs

Discussion 0

Correct Answer: B Vote an answer

Free 199-01 Questions for Riverbed Certified Solutions Professional 199-01 Exam as PDF & Practice Test Engine

Download Free Riverbed 199-01 Demo