Free MB-335 Questions for Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert MB-335 Exam as PDF & Practice Test Engine
You need to meet the needs for the large teakwood furniture order.
What must you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
What must you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Correct Answer:
Explanation:
You need to create the new summer limited edition bicycle in Dynamics 365 in preparation for taking orders.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Correct Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/dimension-based-product-configuration
A company uses Dynamics 365 Supply Chain Management for its accounts receivable and accounts payable operations.
The company must issue payments to customers based on the sales quantities invoiced over a specific period.
A record must be labeled as Pending review when it is generated before anything else is done to the record.
You need to configure the system to apply this labeling functionality to records.
Solution: Configure a business event for the rebate creation.
Create a power automate flow for approvals to lock the record until it is approved.
Does the solution meet the goal?
The company must issue payments to customers based on the sales quantities invoiced over a specific period.
A record must be labeled as Pending review when it is generated before anything else is done to the record.
You need to configure the system to apply this labeling functionality to records.
Solution: Configure a business event for the rebate creation.
Create a power automate flow for approvals to lock the record until it is approved.
Does the solution meet the goal?
Correct Answer: B
Vote an answer
A furniture production company is implementing Dynamics 365 Supply Chain Management The furniture goes through multiple stages of production with cutting wood, assembling the furniture, and then apply ing paint.
The production manager wants to ensure that the screws used for the assembly of the furniture are not itemized in inventory. Instead, they must be used as needed by the production team. This could change in the future and must have a flexible approach to configuration.
You need to set up the production requirements for the screws.
How should you configure the screw requirements? To answer, move the appropriate configurations to the correct requirements. You may use each configuration once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content NOTE: Each correct selection is worth one point.
The production manager wants to ensure that the screws used for the assembly of the furniture are not itemized in inventory. Instead, they must be used as needed by the production team. This could change in the future and must have a flexible approach to configuration.
You need to set up the production requirements for the screws.
How should you configure the screw requirements? To answer, move the appropriate configurations to the correct requirements. You may use each configuration once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content NOTE: Each correct selection is worth one point.
Correct Answer:
Explanation:
You need to resolve the issue for UserE.
Which configuration options should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Which configuration options should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Correct Answer:
Explanation:
A company manufactures high performance bicycles.
The bicycles come in several different preconfigured models. Customers can also purchase custom configurations. Several add-ons are dependent on other accessories in order to be installed.
You need to set up the system to handle the different product configurations.
What should you do?
The bicycles come in several different preconfigured models. Customers can also purchase custom configurations. Several add-ons are dependent on other accessories in order to be installed.
You need to set up the system to handle the different product configurations.
What should you do?
Correct Answer: B
Vote an answer
You are a process engineer evaluating lean vs. Discrete processing. You warn to convert a Kanban item. This item has the following Lean setup:
* The setup uses a lean schedule group with a throughput ratio = 2.
* The process activity tied to production flow has the following runtime activity times: time = 3 mm. per quantity = 1.
* The work cell capacity has a model type of Throughput and an average throughput quantity of 60 per a capacity period of standard workday (8-hour day).
* The throughput is 10 per hour.
You need to set up a Discrete operation to mirror the item s production flow activity.
What should you do?
* The setup uses a lean schedule group with a throughput ratio = 2.
* The process activity tied to production flow has the following runtime activity times: time = 3 mm. per quantity = 1.
* The work cell capacity has a model type of Throughput and an average throughput quantity of 60 per a capacity period of standard workday (8-hour day).
* The throughput is 10 per hour.
You need to set up a Discrete operation to mirror the item s production flow activity.
What should you do?
Correct Answer: A
Vote an answer
You need to configure the system to meet the requirements.
What should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
What should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Correct Answer:
Explanation:
Topic 7, Adventure Works Cyclesbackground
Adventure Works Cycles is a high-end bicycle manufacturer in North America. Their standard model bicycles are available year-round. Limited-edition bicycle models are released several times a year to boutique retailers domestically.
Adventure Works has had the most success with their limited-edition bicycles. These bicycles have high margins, are in high demand, and have a strong following with the younger generation biking community.
Bicycle manufacturing
* Bicycle models are measured and reported against how well a single model performs as a sum of all the variations of that model. For example, the Street Kid YOLO model sold 25,000 units in 2019 across all variations of the product, but the Purple Female frame made up 30 percent of that model ' s sales.
* The Street Kid YOLO models sell in different volumes depending on the market.
* The creation of production orders for bicycles occurs monthly and is based on historical sales.
* Each part of a bicycle ' s assembly occurs at a different station in the Adventure Works production facility.
* A piece of paper that has eight sections accompanies a bicycle throughout the manufacturing process. As each step is completed, the respective section is completed and signed off by a production worker.
* The completed paper is used in the put-away process by the warehouse workers.
Financials
* The standard model and limited-edition bicycle teams are separate operating units within the manufacturing division. Financials are tracked and reported separately even though they are produced and sold in the same sales channels.
* Updates to the standard model bicycle models are created when a part for a bicycle becomes unavailable.
This can change the cost of the product.
* An updated model of a bicycle with new parts will be maintained as a new item and have a new price.
However, it will look like the exact same product to retailers and distributors.
Manufacturing process
Limited-edition bicycle process
The limited-edition bicycles are made up of an Adventure Works custom frame with all other parts created by local artists and manufacturers.
* Each bicycle has a unique set of new items that make up the bill of materials (BOM) because all parts are created to specification.
* A single pilot limited-edition bicycle is created as a proof of concept.
* Adventure Works occasionally reuses components from existing bicycles, but most limited-edition bicycles are made of handcrafted components designed to specifications.
* Each limited-edition bicycle is built, and hand signed by a single Adventure Works artisan.
* Sales price must be auto calculated after the cost price is derived.
* Before creating the proof of concept limited-edition bicycle, the approximate sales price needs to be determined through a cost-plus 20 percent calculation.
* All items except for the frame in the prototype process are considered finished items and can be sold individually.
* The frame items require modifications in accordance with the manufacturing process as well as painting.
* Each Adventure Works limited-edition bicycle artisan is scheduled to create a specific number of bicycles in a production run that must be completed by a certain date.
* Limited-edition bicycle artisans work exclusively on a given run of limited-edition bicycles and are not able to work on other tasks.
Limited-edition bicycle BOM assembly process
The prototype process for the limited-edition bicycles is shown in the following graphic:
New limited-edition k bicycle process
Adventure Works is creating a new, limited-edition bicycle to commemorate the company ' s tenth anniversary. The limited-edition bicycle will be designed for charity events and be produced for the summer season.
* The bicycle must be available in men ' s, women ' s, and unisex frame styles. It will be painted in one of 50 hand-painted designs representing the charity of the customer ' s choosing.
* A limited run of 100 bicycles must be created.
* The limited-edition bicycles must use the same production process as the standard model bicycles.
* The limited-edition bicycles must use the same parts used for previous limited-edition bicycles, except for the unique paint colors.
* Frames must be painted in-house.
* Five painting options are available only in the unisex frame style.
New limited-edition bicycle orders
* Customers must be able to place sales orders for the item in the chosen frame configuration, including style and color.
* When an order for the new limited-edition bicycle is created, payment must be provided.
* An approval for an order must exist for the order to be processed.
* Upon approval of an order, production must start immediately and not require re-entry of data.
A company uses a make-to-stock strategy for their key production components.
The number of active Kanban's for these components must be constant.
You need to configure a new Kanban rule.
How should you set up the Kanban type and replenishment strategy? To answer select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
The number of active Kanban's for these components must be constant.
You need to configure a new Kanban rule.
How should you set up the Kanban type and replenishment strategy? To answer select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Correct Answer:
Explanation:
A close-up of a white background AI-generated content may be incorrect.
0
0
0
10