Free MB-330 Questions for Microsoft Dynamics 365 Supply Chain Management Functional Consultant MB-330 Exam as PDF & Practice Test Engine
A company uses Dynamics 365 Supply Chain Management. The company purchased a high-tech machine that cuts production time in half compared to existing machines.
The new machine must be serviced after 200 finished goods are produced. Downtime for the new machine will impact production and must be planned in advance so the production lead times are adjusted The service technicians must always prioritize the new machine repairs over any other repairs.
You need to configure the new machine to prioritize servicing over other repairs.
What should you configure for each requirement? To answer, drag the appropriate configurations to the correct requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content NOTE Each correct selection is worth one point
The new machine must be serviced after 200 finished goods are produced. Downtime for the new machine will impact production and must be planned in advance so the production lead times are adjusted The service technicians must always prioritize the new machine repairs over any other repairs.
You need to configure the new machine to prioritize servicing over other repairs.
What should you configure for each requirement? To answer, drag the appropriate configurations to the correct requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content NOTE Each correct selection is worth one point
Correct Answer:
Explanation:
A distribution company implementing Dynamics 365 Supply Chain Management has two warehouses.
One item is purchased and stocked in only Warehouse1. Occasionally, Warehouse2 requires this item based on customer demand. When this occurs, an order for the item must be automatically created for Warehouse2.
You need to configure the automation of the order for Warehouse2.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
One item is purchased and stocked in only Warehouse1. Occasionally, Warehouse2 requires this item based on customer demand. When this occurs, an order for the item must be automatically created for Warehouse2.
You need to configure the automation of the order for Warehouse2.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Correct Answer:
Explanation:
Box 1: Warehouse1
Set up warehouses for transfer orders.
You can use warehouse levels to create a hierarchy that supports transfer orders between warehouses. Based on this setup, master scheduling calculates item requirements at the individual warehouse level and generates planned transfer orders from an assigned source warehouse to fulfill them.
Click Inventory management > Setup > Inventory breakdown > Warehouses.
Select the warehouse that you want to refill.
On the Master planning FastTab, select the Refilling check box.
In the Main warehouse field, select the warehouse that you want to assign as the refilling warehouse. Master scheduling calculates a transfer requirement for the selected warehouse and generates a planned transfer order from the assigned Main warehouse.
Note: If you clear the Refilling check box, the selected warehouse is assigned a warehouse level in regard to the Main warehouse, but the Main warehouse is not set up as a refilling warehouse.
Close the page to apply the new setup.
Box 2: Transfer
Reference: https://docs.microsoft.com/id-id/dynamics365/supply-chain/warehousing/transfer-orders- warehouse
A company uses planning optimization in Dynamics 365 Supply Chain Management. Automatic firming is enabled. Some of the planned purchase orders are not being firmed as expected. The inventory planners therefore need to manually process planned purchase orders.
You need to include the planned purchase orders in automatic firming.
What are two possible configurations you can use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
You need to include the planned purchase orders in automatic firming.
What are two possible configurations you can use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
Correct Answer: C,D
Vote an answer
Explanation: Only visible for ExamDiscuss members. You can sign-up / login (it's free).
You are the customer relations manager at a wholesale company.
You perform promotion planning and must track fund usage.
You need to set up a trade allowance agreement to register and track promotion contracts.
Which two items should you set up prior to creating the agreement? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
You perform promotion planning and must track fund usage.
You need to set up a trade allowance agreement to register and track promotion contracts.
Which two items should you set up prior to creating the agreement? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
Correct Answer: B,C
Vote an answer
Explanation: Only visible for ExamDiscuss members. You can sign-up / login (it's free).
You need to set up the procurement category hierarchy in accordance with company policy.
What should you do?
What should you do?
Correct Answer: D
Vote an answer
A company is designing a new bicycle by using a dimension-based Bill of materials (BOM).
The configuration groups have been defined and created.
You need to set up a BOM for the new bicycle.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
The configuration groups have been defined and created.
You need to set up a BOM for the new bicycle.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Correct Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/dimension-based-product-configuration
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company is implementing inventory management in Dynamics 365 Supply Chain Management.
The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound transactions.
You need to select the appropriate option to block the inventory in the system.
Solution: Configure a blocking cause in the inventory setup configuration.
Does the solution meet the goal?
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company is implementing inventory management in Dynamics 365 Supply Chain Management.
The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound transactions.
You need to select the appropriate option to block the inventory in the system.
Solution: Configure a blocking cause in the inventory setup configuration.
Does the solution meet the goal?
Correct Answer: B
Vote an answer
A company is implementing the Warehouse management module and Warehouse Management mobile app for Dynamics 365 Supply Chain Management. You are configuring the mobile app for worker use.
The company requires the following accessibility features for workers to interact with the mobile app:
* Adjusted text size
* Spoken feedback
* Dark background for the screen
You need to configure the accessibility features.
Which accessibility features should you configure? To answer, select the appropriate options in the answer area NOTE: Each correct selection is worth one point.
The company requires the following accessibility features for workers to interact with the mobile app:
* Adjusted text size
* Spoken feedback
* Dark background for the screen
You need to configure the accessibility features.
Which accessibility features should you configure? To answer, select the appropriate options in the answer area NOTE: Each correct selection is worth one point.
Correct Answer:
Explanation:
A company uses Dynamics 365 Supply Chain Management.
The company needs to maintain item bar codes.
You need to set up bar codes for the items.
Which option should you use for each requirement? To answer, drag the appropriate options to the correct requirements. Each option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
The company needs to maintain item bar codes.
You need to set up bar codes for the items.
Which option should you use for each requirement? To answer, drag the appropriate options to the correct requirements. Each option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Correct Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/use-bar-codes-in-warehouse-operations
A company uses Dynamics 365 Supply Chain Management to sell consumer electronics to retailers across North America.
An inventory manager needs to view purchase orders by different periods of time for all warehouses.
If there are insufficient orders for expected demand, the manager must create new purchase or transfer orders to meet the demand versus the current on-hand inventory that is already allocated for future demand.
The company also needs to keep a surplus of 5 percent of inventory for unexpected demand.
You need to identify a solution to meet these requirements.
Which feature should you use for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
An inventory manager needs to view purchase orders by different periods of time for all warehouses.
If there are insufficient orders for expected demand, the manager must create new purchase or transfer orders to meet the demand versus the current on-hand inventory that is already allocated for future demand.
The company also needs to keep a surplus of 5 percent of inventory for unexpected demand.
You need to identify a solution to meet these requirements.
Which feature should you use for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Correct Answer:
Explanation:
Reference:
https://community.dynamics.com/ax/f/microsoft-dynamics-ax-forum/147370/supply-schedule-form/497235
0
0
0
10