Free H12-811_V1.0-ENU Questions for Huawei H12-811

Question #1

Which of the following statements about the election of active ports in link aggregation LACP mode is correct?

A. Only compare interface numbers

B. Only compare interface priorities

C. Compare device priorities

D. Compare the interface priority first, if you cannot determine the superior one, continue to compare the interface number, the smaller the better

Discussion 0

Correct Answer: D Vote an answer

Question #2

Two authentication domains "Area 1" and "Area2" are configured on a router acting as an authentication server. If a user authenticates with the correct user name "huawei" and password "hello", the user will be assigned to which authentication domain?

A. Authentication domain "default domain"

B. Authentication domain "Area1"

C. Authentication domain "Area2"

D. Authentication domain "default_admin domain"

Discussion 0

Correct Answer: A Vote an answer

Question #3

Which of the following descriptions about Trunk port and Access port is correct?

A. The Access port can only send tagged frames

B. Trunk ports can only send tagged frames

C. Trunk ports can only send untagged frames

D. The Access port can only send untagged frames

Discussion 0

Correct Answer: D Vote an answer

Question #4

Which of the following messages does the AP request the software version from the AC?

A. Image Data Request

B. VRP System Request

C. Image package Request

D. Software Request

Discussion 0

Correct Answer: A Vote an answer

Question #5

The administrator wants to upgrade the configuration file for the AR2200 through a USB cable, which of the following descriptions is correct? (Multiple choice)

A. Use a mini USB cable to connect the USB port of the PC to the AR2200

B. Use a mini USB cable to connect the PC to the mini USB port of the AR2200

C. AR2200 does not support using USB to update configuration files

D. After connecting the cable, the administrator needs to install the driver for the mini USB

Discussion 0

Correct Answer: B,D Vote an answer

Question #6

As shown in the figure, when the switch needs to forward the frame whose destination mac address is 5489-98ec-f011, which of the following descriptions is correct?

A. The switch needs to send a request to discover the device with the mac address 5489-98ec-f011

B. The switch will flood the frame on all ports except the port that received the frame

C. The switch does not find a matching entry in the mac address table, so it will drop the frame

D. The switch will send a destination unreachable message to the source device

Discussion 0

Correct Answer: B Vote an answer

Question #7

The administrator finds that the two routers stay in the 2-way state when establishing OSPF neighbor relations. Which of the following description is correct?

A. The router is configured with the same process

B. These two routers are DR Other routers in the broadcast network

C. The routers are configured with the same area ID

D. The router is configured with a wrong Router ID

Discussion 0

Correct Answer: B Vote an answer

Question #8

The broadcast address is a special address in which all the host bits in the network address are set to 1, and it can also be used as a host address.

A. False

B. True

Discussion 0

Correct Answer: A Vote an answer

Question #9

The administrator has configured the Router as shown in the figure, so what kind of IP address can a host connected to the G1/0/0 interface of the router obtain through DHCP?

A. The IP address obtained by the host belongs to the 10.20.20.0/24 network

B. The IP address obtained by the host belongs to the 10.10.10.0/24 network

C. The host cannot obtain the address

D. The IP address obtained by the host may belong to the 10.10.10.0/24 network or the 10.20.20.0/24 network

Discussion 0

Correct Answer: B Vote an answer

Question #10

In the network shown in the figure, which of the following configurations can enable host A to access the Internet, but host B cannot? (Multiple choice)

A. acl number 2000
rule 5 deny source 100.0.12.0.0.0.0.255
rule 10 permit source 100.0.13.0.0.0.0.255
#
interface GigabitEthernet0/0/3
traffic-filter outbound acl 2000
#

B. acl number 2000
rule 5 permit source 100.0.13.0.0.0.0.255
rule 10 deny source 100.0.12.0.0.0.0.255
#
interface GigabitEthernet0/0/3
traffic-filter outbound acl 2000
#

C. acl number 2000
rule 5 permit source 100.0.13.0.0.0.0.255
rule 10 deny
#
interface GigabitEthernet0/0/3
traffic-filter outbound acl 2000
#

D. acl number 2000
rule 5 deny source 100.0.12.0.0.0.0.255
rule 10 permit
#
interface GigabitEthernet0/0/3
traffic-filter outbound acl 2000
#

Discussion 0

Correct Answer: A,B,C,D Vote an answer

Question #11

An ACL rule is as follows: Which of the following IP addresses can be matched by the permit rule rule 5 permit ip source 10.0.2.0 0.0.254.255? (Multiple choice)

A. 7.1.2.1

B. 6.1.3.1

C. 9.1.1.1

D. 8.2.2.1

Discussion 0

Correct Answer: B,C Vote an answer

Question #12

Which of the following commands to configure the default route is correct?

A. [huawei-Serial0] ip route-static 0.0.0.0 0.0.0.0 0.0.0.0

B. [huawei] ip route-static 0.0.0.0 255.255.255.255 192.168.1.1

C. [huawei] ip route-static 0.0.0.0 0.0.0.0 0.0.0.0

D. [huawei] ip route-static 0.0.0.0 0.0.0.0 192.168.1.1

Discussion 0

Correct Answer: D Vote an answer

Question #13

Which of the following configuration commands is correct?
<Huawei> system-view
[Huawei] command-privilege level 3 view user save

A. Modify the permission level of the save command used by a certain user to 3

B. Modify the authority level of the user view command to 3, and save the configuration

C. Modify the permission level of the save command in the user view to 3

D. Modify the user's permission level to 3, and save the configuration

Discussion 0

Correct Answer: C Vote an answer

Free H12-811_V1.0-ENU Questions for Huawei HCIA-Datacom V1.0 H12-811_V1.0-ENU Exam as PDF & Practice Test Engine

Download Free Huawei H12-811_V1.0-ENU Demo