Free HPE0-S59 Questions for HP HPE0-S59 Exam

Question #1

You are planning to propose an unmanaged InfiniBand switch for a company ' s Al interconnect. What should you verify?

A. That the switch supports deterministic routing

B. That the company has or can deploy a separate subnet manager

C. That the switch model that you are recommending supports RoCEv2

D. That the company has an HPE Aruba Networking Central subscription for managing the switch

Discussion 0

Correct Answer: B Vote an answer

Question #2

An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement

Discussion 0

Correct Answer:

Explanation:
To prevent a timeout and loss of communication during an external switch firmware upgrade, the customer should configure the LACP failover trigger within the uplink set. By setting the LACP failover trigger to " All active uplinks transition to offline, " the configuration ensures that the traffic will be redirected to available uplinks in the event of an uplink failure or during the upgrade process, maintaining communication and preventing timeouts.
Reference: HPE Synergy Configuration Guide

Question #3

Your customer plans to deploy VMware ESXi 7.0 U2, and they are looking for a hardware platform that will allow them to use up to 24 TB of physical memory.
Which HPE compute system meets the customer ' s requirements?

A. HPE Superdome Flex 280

B. HPE ProLiant DL380 Gen 10 Plus

C. HPE ProLiant DL580 Gen 10

D. HPE Synergy 480 Gen10 Plus

Discussion 0

Correct Answer: A Vote an answer

Question #4

Your customer has a logical enclosure configured using a single HPE Synergy frame with the following configuration:
* Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
* Two HPE Synergy Virtual Connect SE 32Gb FC Modules
* Twelve HPE Synergy 480 Gen10 Plus compute nodes with appropriate mezzanine cards They plan to add a new HPE Synergy frame to an existing logical enclosure with the following configuration:
* Two HPE Synergy Virtual Connect SE 32Gb FC Modules
* Two HPE Synergy 20Gb Interconnect Link Modules
* Eight HPE Synergy 480 Gen10 Plus compute nodes with appropriate mezzanine cards Which statement about the planned configuration change is true?

A. Four compute modules must be moved to the second frame to balance the configuration.

B. The two HPE Synergy 20Gb Interconnect Link Modules must be replaced with the 50Gb option.

C. The HPE Synergy Virtual Connect SE 32Gb FC Modules from both frames should be stacked.

D. A license for an extended logical enclosure must be added to HPE OneView through GUI.

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for ExamDiscuss members. You can sign-up / login (it's free).

Question #5

Which compute node parameters are captured within server hardware type?

A. Mezzanine card configuration

B. installed operating system

C. Number of the CPUs

D. Size of the memory Installed

Discussion 0

Correct Answer: A Vote an answer

Question #6

Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?

A. If there is at least one ISCSI network configured that will provide access to the module.

B. If the D3940 module is imported in managed state that allows volume provisioning.

C. If the D3940 storage module is property licensed through HPE OneView interface.

D. If there Is a logical interconnect created based on the 12Gb SAS switches.

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for ExamDiscuss members. You can sign-up / login (it's free).

Question #7

What is a limitation when creating a server profile?

A. ILO management is limited to the integration with Active Directory or LDAP

B. It is not possible to create shared volumes on demand through a server profile

C. BIOS settings can be changed only when UEFI optimized is selected as boot mode

D. Administrator cannot define more than 8 connections within a server profile

Discussion 0

Correct Answer: C Vote an answer

Question #8

Which statement about the HPE OneView Update Readiness Checker is true?

A. It can be used to determine whether the latest milestone HPE OneView edition is currently installed.

B. It can be used to examine the firmware version installed on compute nodes and compliance with HPE OneView version.

C. It can be used to verify compatibility of a given Synergy Service Pack with a specific version of HPE OneView.

D. It can be used to evaluate the health of an HPE OneView appliance before proceeding with an appliance update.

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for ExamDiscuss members. You can sign-up / login (it's free).

Question #9

Your customer used to manage their HPE 3PAR arrays using HPE OneView Now they have replaced these arrays HPE Primera.
How does managing the new arrays compare to managing their old arrays?

A. HPE OneView offers additional functionalities for HPE Primera like CPG management

B. HPE OneView offers limited support tor HPE Primera because of the firmware differences

C. To manage HPE Primera using HPE OneView. a dedicated license is required

D. Management procedures and features are the same tor both types of the array

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for ExamDiscuss members. You can sign-up / login (it's free).

Question #10

Your customer with an HPE Synergy environment needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Which parameter can the customer configure within an uplink set to meet their requirements?

A. The customer should enable LACP load-balancing.

B. The customer should set the connection mode to manual.

C. The customer should set LACP timer to long.

D. The customer should disable LACP failover trigger.

Discussion 0

Correct Answer: C Vote an answer

Question #11

Click the area within the iLO management interface that will allow you to access workload Advisor.

Discussion 0

Correct Answer:

Explanation:
The Performance section within the iLO management interface provides access to the Workload Advisor.
This feature offers insights and analytics regarding the server ' s performance, helping to optimize workloads and manage resources efficiently.
Reference: HPE iLO 5 User Guide

Free HPE0-S59 Questions for HPE Compute Solutions HPE0-S59 Exam as PDF & Practice Test Engine

Download Free HP HPE0-S59 Demo