Free N10-008 Questions for CompTIA Network+ Certification N10-008 Exam as PDF & Practice Test Engine
A company is deploying a SAN at headquarters and a branch office 1,000mi (1,609km) away that will access small amounts of data. Which of the following types of connections would be MOST cost effective to implement?
Correct Answer: D
Vote an answer
Explanation: Only visible for ExamDiscuss members. You can sign-up / login (it's free).
A network manager wants to set up a remote access system for the engineering staff. Access to this system will be over a public IP and secured with an ACL. Which of the following best describes this system?
Correct Answer: A
Vote an answer
A company needs to virtualize a replica of its internal physical network without changing the logical topology and the way that devices behave and are managed. Which of the following technologies meets this requirement?
Correct Answer: C
Vote an answer
Explanation: Only visible for ExamDiscuss members. You can sign-up / login (it's free).
A network engineer is designing a new secure wireless network. The engineer has been given the following requirements:
1. Must not use plaintext passwords
2. Must be certificate based
3. Must be vendor neutral
Which of the following methods should the engineer select?
1. Must not use plaintext passwords
2. Must be certificate based
3. Must be vendor neutral
Which of the following methods should the engineer select?
Correct Answer: C
Vote an answer
A network technician is deploying multiple switches for a new office. The switches are separately managed and need to be cabled in to support dual firewalls in a HA setup. Which of the following should the technician enable to support proper stability of the network switches?
Correct Answer: B
Vote an answer
A network engineer performs the following tasks to increase server bandwidth:
- Connects two network cables from the server to a switch stack
- Configure LACP on the switchports
- Verifies the correct configurations on the switch interfaces
Which of the following needs to be configured on the server?
- Connects two network cables from the server to a switch stack
- Configure LACP on the switchports
- Verifies the correct configurations on the switch interfaces
Which of the following needs to be configured on the server?
Correct Answer: A
Vote an answer
Explanation: Only visible for ExamDiscuss members. You can sign-up / login (it's free).
A company just migrated its email service to a cloud solution. After the migration, two-thirds of the internal users were able to connect to their mailboxes, but the connection fails for the other one- third of internal users. Users working externally are not reporting any issues. The network administrator identifies the following output collected from an internal host:
c:\user> nslookup newmail.company.com
Non-Authoritative answer:
Name: newmail.company.com
IPs: 3.219.13.186, 64.58.225.184, 184.168.131.243
Which of the following verification tasks should the network administrator perform NEXT?
c:\user> nslookup newmail.company.com
Non-Authoritative answer:
Name: newmail.company.com
IPs: 3.219.13.186, 64.58.225.184, 184.168.131.243
Which of the following verification tasks should the network administrator perform NEXT?
Correct Answer: A
Vote an answer
A desktop support department has observed slow wireless speeds for a new line of laptops using the organization's standard image. No other devices have experienced the same issue. Which of the following should the network administrator recommend troubleshooting FIRST to resolve this issue?
Correct Answer: B
Vote an answer
Which of the following can be used to identify users after an action has occurred?
Correct Answer: C
Vote an answer
Which of the following types of planes propagates routing information in an SDWAN solution?
Correct Answer: A
Vote an answer
SIMULATION
You have been tasked with setting up a wireless network in an office. The network will consist of
3 Access Points and a single switch. The network must meet the following parameters:
- The SSIDs need to be configured as CorpNet with a key of S3cr3t!
- The wireless signals should not interfere with each other
- The subnet the Access Points and switch are on should only support 30 devices maximum
- The Access Points should be configured to only support TKIP clients at a maximum speed INSTRUCTONS Click on the wireless devices and review their information and adjust the settings of the access points to meet the given requirements.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.




You have been tasked with setting up a wireless network in an office. The network will consist of
3 Access Points and a single switch. The network must meet the following parameters:
- The SSIDs need to be configured as CorpNet with a key of S3cr3t!
- The wireless signals should not interfere with each other
- The subnet the Access Points and switch are on should only support 30 devices maximum
- The Access Points should be configured to only support TKIP clients at a maximum speed INSTRUCTONS Click on the wireless devices and review their information and adjust the settings of the access points to meet the given requirements.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.




Correct Answer:
On the first exhibit, the layout should be as follows
Access Point Name AP1
IP Address 192.168.1.3/27
Gateway 192.168.1.2
SSID corpnet
SSID Broadcast yes
Mode G
Channel 1
Speed Auto
Duplex Auto
WPA
Passphrase S3cr3t!
Exhibit 2 as follows
Access Point Name AP2
IP Address 192.168.1.4/27
Gateway 192.168.1.2
SSID corpnet
SSID Broadcast yes
Mode G
Channel 6
Speed Auto
Duplex Auto
WPA
Passphrase S3cr3t!
Exhibit 3 as follows
Access Point Name AP3
IP Address 192.168.1.5/27
Gateway 192.168.1.2
SSID corpnet
SSID Broadcast yes
Mode G
Channel 11
Speed Auto
Duplex Auto
WPA
Passphrase S3cr3t!
Access Point Name AP1
IP Address 192.168.1.3/27
Gateway 192.168.1.2
SSID corpnet
SSID Broadcast yes
Mode G
Channel 1
Speed Auto
Duplex Auto
WPA
Passphrase S3cr3t!
Exhibit 2 as follows
Access Point Name AP2
IP Address 192.168.1.4/27
Gateway 192.168.1.2
SSID corpnet
SSID Broadcast yes
Mode G
Channel 6
Speed Auto
Duplex Auto
WPA
Passphrase S3cr3t!
Exhibit 3 as follows
Access Point Name AP3
IP Address 192.168.1.5/27
Gateway 192.168.1.2
SSID corpnet
SSID Broadcast yes
Mode G
Channel 11
Speed Auto
Duplex Auto
WPA
Passphrase S3cr3t!
A technician is troubleshooting a network switch that seems to stop responding to requests intermittently whenever the logging level is set for debugging. Which of the following metrics should the technician check to begin troubleshooting the issue?
Correct Answer: D
Vote an answer
Explanation: Only visible for ExamDiscuss members. You can sign-up / login (it's free).
A customer is having issues accessing local resources on the network. A technician questions the user and discovers that a small switch had been taken out of storage and installed so that additional devices could be connected in the room. The technician runs the ping command from the PC to the network server and does not find any issues. However, data transfers to the server are slow, and the transfer appears to be locked up at times. Which of the following is the most likely cause of the issue?
Correct Answer: A
Vote an answer
0
0
0
10
