Exam N10-009 Topic 2 Question 6 Discussion
Actual exam question for CompTIA's N10-009 exam
Question #: 6
Topic #: 2
Question #: 6
Topic #: 2
A network administrator is deploying a new switch and wants to make sure that the default priority value was set for a spanning tree. Which of the following values would the network administrator expect to see?
Suggested Answer: C Vote an answer
* Understanding Spanning Tree Protocol (STP):
* STP is used to prevent network loops in Ethernet networks by creating a spanning tree that selectively blocks some redundant paths.
* Default Priority Value:
* Bridge Priority: STP uses bridge priority to determine which switch becomes the root bridge.
The default bridge priority value for most switches is 32768.
* Priority Range: The bridge priority can be set in increments of 4096, ranging from 0 to 61440.
* Configuration and Verification:
* When deploying a new switch, the network administrator can verify the bridge priority using commands such as show spanning-tree to ensure it is set to the default value of 32768.
* Comparison with Other Values:
* 4096 and 8192: Lower than the default priority, indicating these would be manually configured for higher preference.
* 36684: A non-standard value, likely a result of specific configuration changes.
References:
* CompTIA Network+ study materials on Spanning Tree Protocol and network configuration.
* STP is used to prevent network loops in Ethernet networks by creating a spanning tree that selectively blocks some redundant paths.
* Default Priority Value:
* Bridge Priority: STP uses bridge priority to determine which switch becomes the root bridge.
The default bridge priority value for most switches is 32768.
* Priority Range: The bridge priority can be set in increments of 4096, ranging from 0 to 61440.
* Configuration and Verification:
* When deploying a new switch, the network administrator can verify the bridge priority using commands such as show spanning-tree to ensure it is set to the default value of 32768.
* Comparison with Other Values:
* 4096 and 8192: Lower than the default priority, indicating these would be manually configured for higher preference.
* 36684: A non-standard value, likely a result of specific configuration changes.
References:
* CompTIA Network+ study materials on Spanning Tree Protocol and network configuration.
by Hulda at Sep 05, 2024, 06:09 PM
0
0
0
10
Comments
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
Report Comment
Commenting
You can sign-up / login (it's free).