640-692
FREE EXAM DUMPS QUESTIONS & ANSWERS
Cisco
640-692 Exam
Supporting Cisco Routing and Switching Network Devices
View 640-692 actual exam questions, answers and explanations for free.
Go To 640-692 Questions
All the information you need to pass Cisco Supporting Cisco Routing and Switching Network Devices 640-692 exam and free practice exam verified by ExamDiscuss exam experts.
| Section | Weight | Objectives |
|---|
| General Networking Knowledge | 23% | 1 Describe in general terms the basic functionality and key differences for the following hardware: LAN switch, router, modem, and wireless access points
2 Describe what an IP address and subnet is
3 Differentiate between these Layer 2 technologies: Ethernet, Fast Ethernet, Gigabit Ethernet, Serial, ATM, ISDN, DSL, Optical, and etc.
4 Describe what FTP does
5 Describe what TFTP does
6 Describe what a CSU/DSU does (such as, loop back processes, and etc.)
7 Describe Telco termination point (such as, demarc, and etc.)
8 Describe what Telnet and SSH do
9 Describe what ping does
10 Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network
11 Identify and correct common network problems at Layers 1 and 2 |
| Identify Cisco Equipment and Related Hardwares | 27% | 1 Identify the interfaces on Cisco equipment including the Cisco Catalyst 6500, 4500, 3560, 3750 and 2975 and 2960 series switches and Cisco 2800, 2900, 3800, 3900, 7200, 7300, 7600 series integrated service routers
2 Identify the cabling on Cisco equipment
3 Identify Cisco products by logo marking and model number (including, but not limited to, locations on chassis, line card, module, or adapter)
4 Identify and locate the serial number of Cisco products (including, but not limited to, locations on chassis, line card, module, or adapter)
5 Identify and describe the commonly used components
6 Describe the hardware memory common terms and use in Cisco routers and switches |
| Describe Cisco IOS Software Operation | 27% | 1 Describe the different operating modes for Cisco CatOS/IOS Software
2 Navigate between the different operating modes listed
3 Determine the current mode of the device
4 Copy and paste a configuration file from/to a router or switch
5 Know how to use and interpret the basic Cisco IOS Software commands
6 Describe where to find the configuration register parameter and how to change it
7 Identify a configuration file from a Cisco device
8 Perform software upgrade or downgrade using TFTP, xmodem, tftpdnld, flash memory, memory card reader, or USB
9 Perform password recovery on a Cisco device |
| Service-related Knowledge | 23% | 1 Locate and use a text editor (such as, Notepad)
2 Locate and use Terminal Emulation
3 Locate and use the Window command prompt
4 Configure networks settings for Ethernet port on laptop (IP address, subnet mask and default gateway) and establish a connection with Ethernet ports on Cisco equipment
5 Make a physical connection from laptop to Cisco console port
6 Connect, configure, and verify operation status of a device interface
7 Make a physical Ethernet connection from laptop to Cisco device Ethernet port using correct cable
8 Use a modem to connect to Cisco console port and phone line
9 Configure the correct DIP switch settings on the modem (or other appropriate settings)
10 Identify the different loop-back plugs
11 Identify null modem cable and application
12 Configure and use TFTP server (such as, TFTP d32)
13 Use the hardware tools needed for repair |
