Free ISTQB-Advanced-Lev1 Questions for ASTQB ISTQB Advanced Level Test manager ISTQB-Advanced-Lev1 Exam as PDF & Practice Test Engine
A car manufacturer is updating its airbag deployment system for its family cars. It has increased the number of airbags from four to nine. This has necessitated an upgrade to the airbag control software (ACS) to allow deployment of the extra airbags where appropriate. The car manufacturer receives information from on-board sensors. From this, it calculates the amount of deployment needed (minimal, medium and full), and from which airbag(s). For this upgrade, it will
receive information from extra sensors to be used in its calculations. The car manufacturer employs its own in-house software development team. It uses the V model for its software development. There are four stages of testing, from unit through to factory acceptance testing. The development team is made up of project, programming and test managers. The programmers use object-oriented methods for development. The car manufacturer wishes to be first to market with the extra airbags, which will allow it to increase the safety ratings for its family cars, thereby increasing sales in a very competitive market. Which of the following is a product risk of the upgrade described?
receive information from extra sensors to be used in its calculations. The car manufacturer employs its own in-house software development team. It uses the V model for its software development. There are four stages of testing, from unit through to factory acceptance testing. The development team is made up of project, programming and test managers. The programmers use object-oriented methods for development. The car manufacturer wishes to be first to market with the extra airbags, which will allow it to increase the safety ratings for its family cars, thereby increasing sales in a very competitive market. Which of the following is a product risk of the upgrade described?
Correct Answer: B
Vote an answer
Select the correct statement regarding test planning and control
Correct Answer: A
Vote an answer
A software company developed a software application for a Life Insurance Company. The testers of the software company were given the release to test. The software application calculates the annual life insurance cost based on customers' age. Life insurance cost is as follows per year; # Age 18 or less: US $ 300 # Age over 18 or less than 70: US $ 500 # Person has to be at least 1 year old to purchase insurance If a customer enters any other age, the software prints an error message. The Application accepts only positive integer values (no decimals). Given above scenario, how many valid test cases at minimum can you derive using equivalence partitioning?
Correct Answer: C
Vote an answer
Integrated Solutions Inc. is a software testing company with 20 testers. One of their clients provided a software release and requested to test the software within 2 weeks. The client did not provide any specifications of the software or any documentation. However, Integrated Solutions Inc. testers have tested similar releases from the same client in the past. As a Senior Software Tester, what is your best approach?
Correct Answer: B
Vote an answer
A car manufacturer is updating its airbag deployment system for its family cars. It has increased the number of airbags from four to nine.
This has necessitated an upgrade to the airbag control software (ACS) to allow deployment of the extra airbags where appropriate.
The car manufacturer receives information from on-board sensors. From this, it calculates the amount of deployment needed (minimal, medium and full), and from which airbag(s). For this upgrade, it will receive information from extra sensors to be used in its calculations.
The car manufacturer employs its own in-house software development team. It uses the V model for its software development. There are four stages of testing, from unit through to factory acceptance testing. The development team is made up of project, programming and test managers. The programmers use object-oriented methods for development. The car manufacturer wishes to be first to market with the extra airbags, which will allow it to increase the safety ratings for its family cars, thereby increasing sales in a very competitive market. Which of the following are risks associated with the use of the V model for this upgrade?
I. The sensors may not be responsive enough in impacts.
II. The manufacturer may not be able to process the information received from the sensors quickly enough.
III. The time required to create the high- and low-level designs may mean that insufficient time can be spent on system testing.
IV. The system may fail factory acceptance testing, necessitating costly rework.
This has necessitated an upgrade to the airbag control software (ACS) to allow deployment of the extra airbags where appropriate.
The car manufacturer receives information from on-board sensors. From this, it calculates the amount of deployment needed (minimal, medium and full), and from which airbag(s). For this upgrade, it will receive information from extra sensors to be used in its calculations.
The car manufacturer employs its own in-house software development team. It uses the V model for its software development. There are four stages of testing, from unit through to factory acceptance testing. The development team is made up of project, programming and test managers. The programmers use object-oriented methods for development. The car manufacturer wishes to be first to market with the extra airbags, which will allow it to increase the safety ratings for its family cars, thereby increasing sales in a very competitive market. Which of the following are risks associated with the use of the V model for this upgrade?
I. The sensors may not be responsive enough in impacts.
II. The manufacturer may not be able to process the information received from the sensors quickly enough.
III. The time required to create the high- and low-level designs may mean that insufficient time can be spent on system testing.
IV. The system may fail factory acceptance testing, necessitating costly rework.
Correct Answer: D
Vote an answer
A major bank has recently outsourced all of its software development in an effort to reduce its fixed costs. The new supplier will be responsible for all new developments as well as enhancements to existing ones. The bank has retained its own management team for its projects. There will be an in-house project
manager, development manager and test manager for each project. Some staff may work on more than one project, depending on the overall size. An enhancement is being made to allow existing customers to authorise their own loans online, from EUR 1k to EUR 10k by answering a series of questions. You are a test manager with the bank and you have written a test strategy for the outsourced team to follow. Unit testing
has begun but informal conversations with the developers have revealed that they have not received a signed-off specification from the bank for the enhancement.
They do know how loans work though and have created code from conversations with bank staff alongside their own knowledge. How could a strategy have helped to avoid this situation?
manager, development manager and test manager for each project. Some staff may work on more than one project, depending on the overall size. An enhancement is being made to allow existing customers to authorise their own loans online, from EUR 1k to EUR 10k by answering a series of questions. You are a test manager with the bank and you have written a test strategy for the outsourced team to follow. Unit testing
has begun but informal conversations with the developers have revealed that they have not received a signed-off specification from the bank for the enhancement.
They do know how loans work though and have created code from conversations with bank staff alongside their own knowledge. How could a strategy have helped to avoid this situation?
Correct Answer: B
Vote an answer
Select the correct pair from the following Test Tool Categories?
Test Tools Category:
I. Test Management Tool
II. Web Tools
III. Keyword-Driven Test Automation Tools Features of Test Tools Categories:
a.Supports organization of test artifacts
b.Less likely to modify
c.Help to monitor SLA (service Level Agreements) compliance
Test Tools Category:
I. Test Management Tool
II. Web Tools
III. Keyword-Driven Test Automation Tools Features of Test Tools Categories:
a.Supports organization of test artifacts
b.Less likely to modify
c.Help to monitor SLA (service Level Agreements) compliance
Correct Answer: A
Vote an answer
Which of the following statements are correct?
I. A failure can be detected only by dynamic testing technique.
II. Defects can exist in test environment.
III. All incidents require a software change.
IV. Code and design reviews can reveal defects
I. A failure can be detected only by dynamic testing technique.
II. Defects can exist in test environment.
III. All incidents require a software change.
IV. Code and design reviews can reveal defects
Correct Answer: C
Vote an answer
0
0
0
10